I have a 89 85hp force model#856x9h the problem is that the trim ram is not contacting the striker plate on the leg of the engine. Can i just loosen the nuts that hold the assebly to the mount and adjust where the ram hits?
I have a 89 17' Spectrum with a 85 HP force. I just put a new piston in it and did a little work on the trim. The compression checks out and are in range of each other. I use the boat at 5000ft and have jetted accourdingly. I have the smallest prop that will fit on the engine which is...
Does anyone know the piston ring gap clearance for my engine. It is an 89 85HP force 856x9h. Putting new wiseco piston in and just want to make sure that it is tight enough.
-Shawn-
Hi all,
I have a 89 force 85hp on a 17ft bluefin aluminum bass and ski. It has electric over hydraulic trim tilt. The problem is that the middle cylinder looks like it may have been over extended or something. The two smaller outer trim cylinders dont lift the engine and it sounds like there...
I have a 1989 force 85hp. 856X9H. I bought the boat for $1500 came with all the running gear, jackets and a year of storage. My g-friend and I have taken the boat out four times. It has been a real blast. The problem is that it will only run out to 3900 rpms at WOT with 1 person. 3500 rpms...
