Recent content by Gtkt3

  1. G

    Chrysler 6hp 1979 Kill Switch Replacement

    Anyone who doesn’t want to drill. Suzuki makes a kill switch that fits a 1/2” hole. Part 37830-89E03. Had to modify plastic nut but it works.
  2. G

    Chrysler 6hp 1979 Kill Switch Replacement

    Shoot, I don't like drilling these old motors. Feels so wrong. lol. But you probably have the easiest and fastest solution. Thanks.
  3. G

    Chrysler 6hp 1979 Kill Switch Replacement

    Looking for help finding a drop in kill switch with lanyard for this motor. It currently has a stop button. Normally open, when pressed it closes. The factory hole for this switch is about 12mm, I have found most killswitches these days are around 15mm and do not fit. Anyone know of a kill...
  4. G

    Chrysler 6hp 1979 62H9k Hesitation and Surge

    Thanks, I forgot to mention I did remove the idle screw completely, inspect, and then reset to 1 turn out. After tuning for idle it was a round 1 and a quarter out. This is actually part of how I got it to idle well while on the water. I will clean the carb and report back.
  5. G

    Chrysler 6hp 1979 62H9k Hesitation and Surge

    Hello, I have an issue with this motor and was hoping to get other’s opinions. Motor sat for an undetermined amount of time. Maybe 25 years or more. Appears to be fresh water used only as there’s no corrosion. Every part was original to motor including spark plugs. As original part paint...
  6. G

    ‘83 Chrysler 7.5 replacement follower for carb throttle linkage

    Had the same issue recently. Modeled the part and 3d printed. Can print and ship for ~$20. Send a message if interested. Thanks
  7. G

    Johnson Seahorse 60hp Store in Forward Gear According to Manual

    Hi all! I have a Johnson seahorse 60hp that I have been working on. Runs incredible now most problems stemmed from corrosion and now it runs like new! I saw one other post on this but there was no clear answer. The manual for my motor shown in the attached photo says to store the motor in...
Top