FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
1994 2 stroke 75hp 3cyl.
I just realized that the safety/man-overboard switch does not kill the engine...
From what I understand, it should pull the CDMs to ground and cut the ignition.
The wiring that I could see at the time appeared to be okay, but I haven't had the chance yet to really dig...
Meant to follow up earlier, but I wanted to run the boat a bit to make sure.
It turned out to be the fuel pump. No more bogging and the plug looks normal. I'm guessing it was just enough to cause a lean condition in the bottom cylinder.
Thanks for all the advice!
It'll still spin while engaged. Mine got stuck in the flywheel and I thought I needed a new starter until I realized the positive terminal on the battery was just slightly loose. Make sure all power connections are solid - it needs a lot of current.
1994 Merc 75hp 2 stroke, 3-cyl. I've been having issues with surging at mid-throttle and discovered the bottom plug appeared half-burned. What would cause this?
I decarbed the engine, put new plugs in, and it did the same thing to the new plugs after a quick outing.
Alright I'll give that a try. I did a visual inspection of a couple of the lines when I replaced the inline fuel filter and they appeared okay inside, but I'll check the carb drain.
1994 Merc 75hp 2-stroke started bogging while cruising. Noticed the primer bulb was empty (not sucked in) when this happened. Replaced both filters, fuel lines, new primer bulb, and removed anti-siphon valve.
Now she only seems to bog down at mid-throttle. Not completely, but you can hear and...
Thanks everyone for the input. I think I'll just buy a new prop and before installing it, use it to make some kind of template/jig to measure blade deflection for the next time it happens (which is inevitable in the lower James River).
Considering I'm running an old 75hp 2-stroke 3cyl Merc, I'm afraid I wouldn't feel any prop vibrations lol. The weight balance would be fine, but a bent blade would still cause an uneven load while rotating I imagine...
I like to overthink things especially when it comes to my beloved boat!