Ok went out in my prosports 22ft center console in the gulf last week. For the first time I was about 20miles out and heading from one spot to another to snapper fish and my RPMs went way up and boat slowed down. I took it out of gear put it back in gear several times very little power and high...
I was told you cannot use it in salt water the side imaging will not work is this true if not whats the max depth i removed one from my bass boat before i sold it and just installed on a center console bay boat and a guy told me tonight i wasted my time it would not work
Ok I have 2 Minnkota Deckhand 40s for my pontoon its a 24 footer and both I have intermittent issues and I just bought a 22ft ProSports Center Console. Anyway I want a decent anchor system that wont break the bank and I am thinking going the manual crank route. Need atleast 150ft of rope I will...
Ok just bought a 22ft Center Console Bay Boat its a ProSports 22ft I am looking for a anchor to use in the shallows and the bay for saltwater fishing. Anyway theres little room on the bow to mount a large anchor winch. I use 2 MinnKota Deckhand 40s on my 24ft pontoon one may fit but I want to go...
I have a centerconsole 2001 model i just bought. It has a 200HP Suzuki and the fuel gauge is not working Where can i find a direct replacement did not see one at iboats?
Ok can anyone tell me what these are worth I have a friend wanting to sell me one. Its not locked up but not sure if I can get it running wanted it more for sa wall hanger.
Ok I have a 24' Intec Marine Pontoon 88 model I put a 1978 model 85 HP evinrude off a 78 glastron bass boat to repower it. Just had the motor checked and carbs rebuilt and left the prop it had when it was on the 16' bass boat which is a 13 1/4x17 prop The issue today when I ran it out the motor...
Ok I have a 24' Intec Marine Pontoon 88 model I put a 1978 model 85 HP evinrude off a 78 glastron bass boat to repower it. Just had the motor checked and carbs rebuilt and left the prop it had when it was on the 16' bass boat which is a 13 1/4x17 prop The issue today when I ran it out the motor...
I have a Johnson 150 VRO 1988 Model. The Oil injection was disabled by previous owner. Boat has been sitting for 2 years. I finally got around to mess with it fist thing I did was a compression test. All 6 cylinders are 75psi I think my gauge is ok but do not have another to test with. All...
Ok I have a 78 model 85hp Evinrude I placed on a 88 model pontoon I used the 88 model contol and wiring harness. Here is the issue. When I opened the control box the kill button wires were cut and the ends were not present. So this morning based on below schematic I wired in a marine kill switch...
Ok I swapped a 88 48HP Johnson on my pontoon and replaced witha 78 85HP Evinrude. The throttle / shift linkages matched up and local boat guy said wairing harness was the same. It did have same plug pin at motor. So everything seems good Tach, Instrument back lights ect seemed to work except. I...
Ok guys I am sorry lost all my pre tear down pics on my pc they are missing in action. Anyway this is a 24' Intec Marine Pontoon it was a basket case. I stripped all the furniture out the frame were rotten so I decided to take it to the deck. Once i removed railings furniture ect I started to...
Ok recently I swapped motors on atoon from a old glastron. I was able to use toons controls wiring ect except toon did not have tilt and trim and motor i pulled has tilt and trim. I was unable to salvage tilt and trim wiring and switch from glastron so I cliped the 3 wires going to the tilt and...
We sorry my images from start to this point have been mysteriously deleted from my pc. Anyway picked up this pontoon about 4-5 months ago. It was floating in a boat slip and owner and I ran it on the lake. The Carpet was molded and trashed all the console and seating frame was rotten but it...
I repowered my pontoon from a 48 hp johnsom with a 85 evinrude. Havent ran evinrude on a old bass boat in a few month and noticed after everythig was hooked up when I use the priming bulb I have a fuel leak in the middle of the fuel hose. This is the hose inside the egine compartment from where...
