Recent content by Hoggedfairlane

  1. H

    timing???

    i went through the sync n link per manual, carbs cleaned and new kits. gas tank pulled and cleaned. new fuel lines and water Seperator and in line filter. plugs wires, coils, stator, trigger, regulator, and power pack from cdi. comp is 100-110 on all starts in qs and is not running on all 6, has...
  2. H

    timing???

    The motor isn’t even starting correctly with the quick start I’m trying to address that issue first I’ll post you a video today off a cold start Maybe that will help Cdi electronics tech told me the timing on start up should be better 12-14* steady at 1500rpm Mine is idling irrationally and the...
  3. H

    timing???

    i will try that , im going to scope cylinders and reeds tonight also. whats exactly am i looking for for ? dumping of fuel and or lack there of?
  4. H

    timing???

    i went through the sync n link per manual, carbs cleaned and new kits. gas tank pulled and cleaned. new fuel lines and water Seperator and in line filter. plugs wires, coils, stator, trigger, regulator, and power pack from cdi. comp is 100-110 on all starts in qs and is not running on all 6, has...
  5. H

    timing???

    ok so i got an issue now with timing. i put a light on the motor, timing is correct at idle, once i advance the throttle and its hit around 10* i lose the timing marks, i let it go back to idle and the mark is there again. timing light loses marks and even goes to a straight light with no...
  6. H

    still issues with losing spark and loading up

    2 motors same issues? lower was done a month ago. fluid and impeller . not running hot at all. i swapped power heads because of this issue, soo????carbs cleaned and kits put in, no bowl warpage from what i can tell laid them flat down with a little light in them . no light coming from bowls...
  7. H

    still issues with losing spark and loading up

    2 motors same issues? lower was done a month ago. fluid and impeller . not running hot at all. i swapped power heads because of this issue, soo????carbs cleaned and kits put in, no bowl warpage from what i can tell laid them flat down with a little light in them . no light coming from bowls...
  8. H

    still issues with losing spark and loading up

    Running on hose. put it in water and runs really crappy
  9. H

    still issues with losing spark and loading up

    since my original post. i pulled the fuel tank, cleaned, new lines and in line filter. new primer bulb. pulled out oil tank and replaced with a known good one with fresh oil replaced the stator, trigger, and power pack replaced the rectifier. cleaned carbs, sync n link checked all grounds for...
  10. H

    where does this plug in?

    coils are coming weds..lol
  11. H

    where does this plug in?

    Ok soo i got this motor running New power pack, stator, trigger, new plugs, cleaned carbs, cleaned fuel tank, took it out of boat, replaced all fuel lines, new plugs, Runs good on hose, will not run in water, still sounds like it’s losing ignition, sync n link was done also Bogs off start...
  12. H

    where does this plug in?

    ok so i got the new harness adapter . got it all hooked up, turn key on, does the self check, all warning lights come back on when i start the motor. runs good for a few seconds until the lights come on and then, slow mode?? or something happens, i ve checked and replaced the shift interupt...
  13. H

    where does this plug in?

    these pics are from an ocean runner 200
  14. H

    where does this plug in?

    i swapped power head to this one which is older and i have the original control , wiring, and oil tank with gauges. i cant find where that plug goes??
  15. H

    where does this plug in?

    thats green red and blue thinking its going to oil sensor in tank and alarms but where did it hook on the motor? idk, i bought this with controls and harness and i cant find where it goes lol.
See more
Top