I have a 1995 9.9 Hp evinrude E10RELEOE that has problems with the engine cover latching. When i bought it it had the cover taped with electrical tape. The lower engine cover seems to be on straight and the cover fits on it good as well as the hook on the front of the cover is seating good...
I am wondering if anyone has used a Pow'r Tran PB100SS power lift on a pontoon or any boat? Like this:
Pow'rTran : Products : PB100SS
I am adding a Pow'r Tran Pontoon bracket to allow installation of my kicker. The way the seats are made on my pontoon and with the addition to the sundeck at...
Can I remove the electric oil/fuel pump from 2005 Johnson 50 HP and go with a manual primer type or whatever came on some of the earlier model year engines???? My 1990 model 48 hp does not have electric type pump from what I remember....
It already has had the oil side undone and is now a...
Is there some kind of adapter that would let a person put a different year motor on there Boat?
I have been thinking of swapping out my motors on my boats and put my 1990 48hp Johnson on my pontoon. The pontoon currently has a BRP helm type shifter on the console the motor it controls is a 2005...
I finally got my gear case took apart where i damaged all the gears and the clutch dog broke apart. I know what parts need to be replaced but am wondering how much damage a gear case can handle internally?
After all the gears,drive shaft, prop shaft is pulled out I noticed in the area where the...
anyone know what comes in this BRP part kit????? BRP-0435275
part #1
http://www.ishopmarine.com/ishop/jsp...ier-100-005-EJ
all my gears are gone in my lower unit. gonna have to have all new most likely.
see this thread http://forums.iboats.com/showthread.php?t=576101
Bought a pontoon that had been sitting for a couple of years. I was trying to run the engine in the yard after cleaning the carbs with the water muff. I think i had had a fuel hose crimped after reinstalling carbs and airbox. I was having issues keeping it running when i started it and it...
Getting a pontoon in the next few days that doesn't have a trolling motor on it. On my 18'Tracker Grizzley I run a 55lb thrust Minn Kota Power Drive V2 with CoPilot 48" shaft. For you guys that have Pontoons what is the best advice you can give me for a trolling motor. I want to keep the Minn...
Thinking of repowering my 20' Pontoon with a larger motor. The pontoon is rated for a 90 HP and is a Weeres .I now has a 50 hp 2 stroke Johnson on it. I have though about either a Evinrude Etec 90hp or Yamaha 90hp 4 stroke. How would are these engines for slow trolling and wear on the...
i made me a transducer mounting plate out of that 1/2" thick plastic,vynil ,pvc, or whatever tpe of material that is.
the question i have is do i mount it flush with the bottom of my boat or set it up a little?
I have a 1860 tracker grizzly aluminum boat.
it i think i made it 4x16 but may cut...
i have a 1990 48hp Johnson and am wondering what type of prop i should be running on my setup? It is on a 18' tracker grizzly aluminum boat. The boat is about 800lbs weight before all fishing gear and equipment was added. I do not know what size or pitch i have now. I bought the prop new and...
ok i have a 1990 48hp Johnson.
I want to keep this engine running as long as i can. I bought the engine when it was 2 yrs old and i was practically new(less than 10 hrs I'd bet). i hardly ever run the thing WOT,maybe 3/4 throttle puts me about 26-27mph.WOT 30mph
I rebuilt the carbs back in...
I have MINN KOTA v2 power drive and just bought a Humminbird depth finder to install at front of boat.
I have the trolling motor transducer mounting kit installed but am unclear on how to keep the cable from being pinched by the grip glide part on the trolling motor when the motor is being...
i bought a 2008 bass tracker grizzly 1860 a few months ago. i finally got all my carb and engine running issues out of the way. One problem i have noticed is when i am cruising down the lake i look back and water is spraying back up on the transom of my boat and my kicker engine. I have a cmc...
