Recent content by Jaime mark

  1. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Thanks to you and your friends for helpful knowledge! About all topics!!
  2. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Not intended my apologies.. maple syrup stuck on my thumb
  3. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Very good point!!!! ALMOST EVERYONE one that sells THERE BOAT SAYS RUNS GREAT UNTIL. WINTERISED IS A PLUS ALONG WITH STORAGE UNLESS YOU MESSAGE THEM AND SEE IT AND HERE IT RUN!!! YA ITS NOT A EASY THING TO DETERMINE COMPLETELY LIKE A CAR OR TRUCK!!!
  4. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Of course!! Just simple shade tree mechanic stuff. No computer to worry 'bout basic old school stuff!!!!!
  5. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Not spending a penny on the purchase without testing the obvious!!
  6. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Excellent that makes sense as long as water feeding it
  7. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Oil change cap rotor and plugs...hands down. Any ideas to know compression out of rhe water of a stock 1988 4.3 besides the obvious for a s10 4.3 on land engine With a basic dial compression gauge?
  8. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Yup!!!
  9. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Is any milky color on a dipstick to be some concern to heads and block? I understand that if you go from full throttle to slamming into idle rpm is not the solution of a brake....like a car to stop it. .lol. if the oil is white as a new gallon of milk on the dip stick would make you run miles...
  10. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Awesome! Thanks
  11. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Do vortec heads require a different cam? Because I don't want to yank the engine out and still not to NEED TO. Can I get fully assembled heads for this and at what cost??
  12. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Thanks for the info!!
  13. J

    Are 88 to 95 4.3 mercruiser stock roller or flat tappet cams?

    Can I jump to 1.7 rollers on stock valvetrain or just stay with 1.6 as a easy upgrade. All stock is it flat tappet or roller cam 88-95? Thanks guys!!
  14. J

    Interested in just knowing about the 4.3L MerCruiser engines.

    Thanks specs are important AND GENERAL MAINTAINED
  15. J

    Interested in just knowing about the 4.3L MerCruiser engines.

See more
Top