jase34242's latest activity

Anyone know if the thermal paste (white stuff) on the side of the pipe and pump is anything specific? Or will generic paste work sold at...

Got it out.. didn't realize I needed to switch this out as an x number of years replacement .. it's about 10 years old..

Hey there I'm here - don't see any PM but just checking in.

cool thank you

Thanks. There's more room than it looked like, got #11 off with no issue. Stopped there because I realized I wasn't setup to handle gas...

remove the fuel lines at the sep, remove the tbi/rail connection, remove the water line hoses,remove the 2 nuts 26 and remove the CF...

Thanks, okay, so I'm not going anywhere near #26. Getting the plastic front off, then removing 12 and 11 will get out of the way...

No, screw 21 just holds the plastic box to the bracket, and you cannot get to it without removing the bracket item 1 Remove the 2 nuts...

I just want to do the easiest way possible :) Will the guts come out just be removing screw 21 ? Thanks for the warning, will be paying...

You don't have to to but you might want to. Once your down that far removing the 2 nuts that hole the entire assembly is easy and come...

Thank you I've found it I think (SN = 1G410891) So I do not remove part 26 to get it removed? It's tight , so I'm not 100% sure I can...

Seems that there are less and less resources for this topic. Wondering if anyone could guide me on how to get this part out while the...

Found it, just where you said. Broke this looking for it.. lower port side of the motor.

Got it, thanks. I can get to all the hoses without too much effort. Alldodge you are right, I thought it was a PS cooler but got the...

Well this isnt what I wanted to find in my 383 freshwater cooled (full closed loop) motor today.. I found one piece right in the back...