Steering on boat went all of a sudden found out it was a rotted broken steering arm bracket first thing why was it not made rust proof crazy . I was told to repair i have to remove powerhead and several other parts that will be corroded . very expensive labor and parts repair . Is it true that a...
I was told by someone that my yamaha outboard spanner nut is not needed mine is very worn out . I was told what it was when the prop was removed , there is no information online , any information or advice would by great , thanks
looking for photos of a 1995 23 foot wac sailfish boat , having a hard time finding information on 1995 sailfish boats , sailfish by seminole could not help and the oldest i see on the web or in the water are 2004
I removed trim assembly unit was not that hard i thought i was not going to be able to get those bolts loose but i was with a socket extractor and force . thanks for the advice job complete .
yes should but does not , just was told to take out the trim tilt mount bolts and try to push the unit foward
Thanks for reply i was told to take out the trim unit mounting bolts and try to pull the unit foward to get access to that rear trim motor bolt . I will try over weekend with a flex...
How do you remove that 10mm bolt on the back of the trim motor , i can not fit my socket on the bolt what a bad design . Any ideas would be a help . thank you
Coils off yamaha outboard has 594J marked on it with the 59 on top and the 4J below it trying to find out what year it was manufactured because outboard is a 200 hp TXRT model and and might want to replace coils. thanks for the help .
Any idea where i can find information on a 1995 sailfish boats there is hardly and information online . In 2015 i purchased a 1995 23 foot sailfish 23 foot wac , with a 95 200 hp yamaha v6 saltwater series 2 stroke . It seems that there is no information prior to 2000. thanks any info would help .
I can not get my end caps to come loose , need to replace both of them because they are leaking , and wiping up yellow fluid is a pain , used the spanner wrench and breaker bar and end caps not coming loose .
My outboard at 4900 rpms only goes 23 mph at wide open throttle, compression 110 on all 6 cyl and prop has no obstructions. Top speed at wot use to be 35 mph . any ideas , thanks ..Yamaha outboard saltwater series 200 hp v6 two stroke.
