Had a boating accedent that ended up ripping off the lower unit and broke part of the east housing (where the lower unit bolts to) my serial number is 0g408421 I can't find the size of the shaft. It's a bass boat and from the top of the transom to the cavitation plate is about 16". It has a...
My motor is constantly beeping and I have taken it to my local marine mechanic who said it was an oil injecting issue. So he replaced the oil module. Beep was still there when I took it out. He replaced the oil cap. Beeping went away for one trip now it's back. It's stopping the motor from...
my boat since i bought it has never kept an idle right in the water. out of the water with the "ear muffs" it idles fine. it just sputters out when im on the lake. also i have no hole shot to speak of. it takes a long time to get to a plane the motor doesn't rev quickly at all. any ideas...
I have a 1983 skeeter with a 150 black max motor. My trim motor is fried, took it apart and its black and smells like death. how do i know what to replace it with? if i get a motor and pump assembly how do i know it will lift my big v6? this is the type of motor and pump that are in the rear...
my distributor went out on me. so i took it to a mechanic, whom tore it apart and said it would be 850 to buy and install a new one. so i left and bought one on the internet for 50$. i have it in place the plugs are on, everything is ready except for the three wires that attach to lugs...
My motor is very hard to start, it takes squirting fuel into the carb to get it to fire. my first thought was the choke. but i can hear it "click" not sure if its working or not, and my manual doesn't give me info on how to check it. there were some bad wires here and their, which led me to...
i took my boat out for the first time on Saturday. it was shaping up to be a great day, the motor fired up and held a strong idle. i putted the 3/4 miles through the no wake zone, and when i passed it I slowly gave it gas. and it was responding beautifully. i got it up on a plane messing with...
what prop should i buy for this 150 hp black max? my lower unit should be in next tues and i over looked the fact that it doesn't have a prop. there are different pitches and 4 and 3 blade. im clueless.
I bought this boat nice and cheap, and now its time to get her on the water. Floorboard is rotten. there is no lower unit on the black max 150. and it has been sitting for a few years. There was no key to the ignition, so i purchased a new one, and will be hooking it up today. I cant find...
people say to measure the transom down to the lower unit for this opproximate length. but i need to buy a lower unit. and dont have one currently at all. so do i measure from where the mid section mounts to the motor, and down to where the middle section ends where the lower unit would bolt??????
i have a 150 hp black max. i have no idea what year it is and i need to find a lower unit for it. there is currently no lower unit on it, didn't come with it. i found a serial number 6424412. not sure if it helps. Also wanted to know if i could run the motor without the lower unit on it...
