Hello I-boaters!<br /><br />Recently there is a new noise out of my engine when he is warm. It's a kind of a very slight ticking noise on low RPM. It wasn't there before. I am wondering this can be related to the piston rings?? I have 9 till 10 kg/cm2 compression on all the cilinders.<br /><br...
Can plug fouling/failure be related to improper indexing on the ficht ram?<br /><br />I gapped mine at 0.030" and indexed at the pin or maximum 45' after the pin (3 to 6 o' clock) {PORT SIDE}. On the other side I indexed to the pin or 45' BEFORE the pin (6 to 9 o' clock). Or should this be 45'...
This post has ben combined with a related post from the same author. Mod1<br /><br /><br />I have a 175 ficht ram (2000 ENGINE).<br /><br />My temp sensor on the port side is broken. I currently am awaiting the new one. The engine gives a priority B check engine warning, but the engine still...
Hello,<br /><br />I have a bad temperature sender on the port side of my engine. At least that is what the computer tells me. It gives code 41 and 42. Temperature sender on the port side below minimum spec. or that the wiring shortcircuits somewhere.<br /><br />Even when the engine is not...
Hello,<br /><br />I have trouble regarding the 175 Ficht RAM. Gave codes 41 and 42. Learned from seahorse that the water temperature meter on the port cylinder head malfunctioned.<br /><br />At the same time the check engine appears the engine runs bad (up and down) when not in gear and raise...
Hello,<br /> <br />I have a 175 Ram Ficht , model E175FPLSSR, serial #4790896.<br /> <br />I experienced the following symptoms on my Engine.<br />Once and a while the alarm buzzer sounds and the check engine light comes on.<br />I have had the dealer read the engine and the stored codes are 42...
