I have a 1987 85hp Force model number 858V7A. On the power trim and tilt, the tilt cylinder slips when the outboard is fully raised. When I take the transom saver off, the outboard slowly comes down. Looking for parts (possibly check valves) to fix this problem. Need help finding parts. The...
I have an 85 hp Force. The owners manual says to run at 4500 to 5500 RPM.
The boat does 26 mph at 5500 RPM.
At full throttle, the boat does 33 mph but it runs at 6500 RPM. Does that mean the boat is under propped or what else could be causing this?
I have an 85 hp Force. The owners manual says to run at 4500 to 5500 RPM.
The boat does 26 mph at 5500 RPM.
At full throttle, the boat does 33 mph but it runs at 6500 RPM. Does that mean the boat is under propped or what else could be causing this?
Just took the carbs off of my 1987 85hp force and cleaned them out. The boat runs fine, but now has a week idle. Should I adjust the idle screws on the carbs or adjust the throttle linkage?
I have a 16 ft. 1987 VIP with 85hp force I just got for $200. Boat is in great shape and was well maintained, but the boat hadn't been ran in 10 years, they just had to get rid of it. Before I did anything to the boat, I turned the key and the motor started right up. I have replaced the...
I have a 1987 -- 85 hp Force Model # 858V7A
I am going to change out the water pump. I have the Clymer manual but it doesn't show how to get to the water pump.
It looks like I need to take 6 bolts off of the lower unit and take the shift pin out. Is there anything else I need...
