I have a 2019 Heritage 241 with a garmin 1242 touch and a Yamaha 250 on it with engine gauges on the Garmin 1242. I finally figured out how to do a combo screen with engine gauges on the left and nav screen on the right. Worked great for a week but now the round engine gauges that I set up are...
I have 8.1 with closed water cooling and have a leak at the sea water pump. I assumed it was the large O-ring and replaced it. Now looking at it closer it is coming out of the hole shown in the pic. I assume it is the back seal shown in parts diagram numbered 6.
Is this correct? How does one...
I need to pull the trim cylinders to rebuild. Boat is considerable distance away and I would like to show up with proper toosl. Does anyone know the size of the wrench required to take off hydraulic lines. I need to buy a flare wrench and forget if it is metric or standard and what size it...
I am using this app and setting up routes. I name the routes giving a destination description. I have transferred the data to a data card and then imported to my Raymarine C - 80. All the data gets imported but routes are not shown. Just all the many waypoints however they are just given a...
Anyone use it? The directions say remove cap and pour crystals into inner cup and then replace lid. If you replace the lid how does the air get to the crystals?
Is there anyway to adjust the tension on gear shifters with electronic throttles. I have twin 4.3's on a Sundancer 280 and the port throttle is harder to move then the stbd. Is there any easy way to adjust tension? I do not have a manual for the throttles and don't have any model information
1999 5.0 L Merc with an Alpha 1 Gen 2 lower end with relatively low hours. How much play between the bell housing and the gimbal ring is considered too much. I have a bit more sideways play then up and down - maybe a 1/4".
Is it normal to drop about 1/2 " after a few hours of running after fluid was changed? I have a 5.0L alpha 1 Gen 2 with a oil bottle.
The marina I bought the oil to top it up today said that it was normal. It took several hours of running for the level to drop. The boat is trailered and sits...
Any body use in line silencers either the ones that slide in the exhaust hose or ones that clamp between two pieces of hose.
I have a 4" through Hull exhaust that I am tired of on a 5.0L stock Merc. Wondering how affective they are at reducing noise and how much power loss I could expect.
I have a HDR 600 Hummingbird Depth Finder. It reads fine in deeper water but when I get to 5 - 6 feet or less it reads 1.2 - 1.4 feet constantly.
Any ideas what it could be?
All other functions work well.
I have the manual and it is of no real help.
I have a 5.0L EFI Merc with an Alpha Gen 2.
I have used the new to me boat 3 times and have already tired of the noise.
What do I need to get back to stock?
Here are pics of my current set up.
Does anyone have experience with these http://www.knbsupply.com/insisy.html
I have a 5.0l Merc EFI with Thru Hull Exhaust and the novelty has worn off after only 3 trips. This would be an easy and inexpensive fix for me if they are effective.
Is there any downside to using them?
Any other...
