Current visitors

Home
Members

jimmbo's latest activity

jimmbo replied to the thread Brake based limited slip differentials.

Brake based Limited Slip Differentials are also known as Traction Control. I will take a LSD over Traction Control any day, though if...

Nov 1, 2025
jimmbo reacted to racerone's post in the thread 1968 evinrude 55 triumph change out hot temp switch with Like.

Hooking up an overheat horn is better.-----Tachometer , water pressure , volt meter , water temperature gauges are available.

Oct 31, 2025
jimmbo replied to the thread 35hp merc. Carb spring hookup?.

The Parts Diagram don't show any Anchoring Screw/Post for the Loop. Perhaps it was retained by #42? That Screen is not visible in the...
Oct 23, 2025
jimmbo replied to the thread Rebuilt my mercarb, now runs awfully.

The TKS does something to Enrich the Mixture, to speed up a Cold Start. Did that get messed up...

Oct 22, 2025
jimmbo replied to the thread Towing friends boat damage.

It still comes down to the Driver doing the Towing to make sure the Coupling is serviceable and secure before Driving away, as all...

Oct 22, 2025
jimmbo replied to the thread One last try.

That would be a Saucer. Quite common in the 60s
Oct 20, 2025
jimmbo replied to the thread 1978 Johnson 140hp running rough. Need advice.

Premium Gas has a lower BTU Value per Volume than Regular Gas, plus, it burns slower. Unless the Engine is requires Premium, you can end...

Oct 20, 2025
jimmbo replied to the thread How can I make my Tracker 40 HP faster?.

That is why a lot of us Ask if the Spark will jump a 3/8" or 7/16" Gap. Air is an Insulator, and the Denser it is, the better of an...

Oct 19, 2025
jimmbo replied to the thread changing from a 2 barrel to a 4 barrel carburetor.

A 22 ft is a lot of Boat for a 4.3. Myself I wouldn't use anything smaller the Big Block in a boat that Size. That said... Tops out at...

Oct 16, 2025
jimmbo replied to the thread 1994 mariner 115, oil injection.

What is the Rpm at WOT?

Oct 15, 2025
jimmbo replied to the thread How do I get that last inch?.

The Winch Strap, even though it is Twisted is Exiting at a good Angle, mainly because it is unwinding from the Bottom of the Winch Reel...

Oct 12, 2025
jimmbo replied to the thread How do I get that last inch?.

When I took delivery of my Boat the Trailer was set up this way, it was to be reconfigured The way I had them adjust it. Move the...
Oct 12, 2025
jimmbo replied to the thread 1994 mariner 115, oil injection.

I've seen a few on the V6s, likely because the Gear is not continuous, and had a Split that has to be lined up, and secured, but not on...

Oct 12, 2025
jimmbo replied to the thread How do I get that last inch?.

Don't back in so Deep.
Oct 12, 2025
jimmbo replied to the thread 1994 mariner 115, oil injection.

The Engineers that designed the Oil Premixing System did a Good Job on it. The Pump Gears are just above the Lower Crank Bearing so they...

Oct 12, 2025

Show older items

Home
Members

Top