I have a 1985 200hp Yamaha and the trim seal seems to be leaking. There is one long one that lifts the engine all the way up and two smaller ones that move much slower and trim the engine when it is under power. The one leaking is one of the smaller ones. Does the seal just pop out of the front...
I read on here once that a fella uses vinegar instead of Salt-Away in his flush system to remove salt deposits and flush his motor. I have been having some issues with crud plugging my thermostats and believe the crud is older salt deposits. Can I pull the t-stats and run a solution high in...
1985 200hp Yamaha. I replaced the water pump, lower seals, and the thermostats. Went out once and everything was fine. Second outing and pisser stopped and alarms went off and engine stopped. HMMM. So after a good cool down I started it up and limped home with a small pisser. So I got it on the...
I have a 1985 yamaha v6 200.Does anyone know what heads are interchangeable? Mine has too many bolts that are breaking when trying to remove them and I would like to have a backup set if mine are not fixable.
So I get as far as the four bolts holding the seal retainer on the main shaft. Well this baby is giving me some trouble. Does it come right out or should I just try to get the seals out? I have the top seal out and see the second. Same on the prop side. I rebuild automatics for cars so how hard...
My 1985 yamaha 200 carb linkage has gotten brittle and I would like to replace before one of the links comes loose at WOT and grenades my motor. Any Ideas where to fond metal linkage to replace the old plastic ball links ?
I just bought a 85 Baja and found that a brace under the dash was broken. It bounced around too much when under way so I got up under there and noticed the break.I have since repaired the problem but now I have small cracks in the dash that need tending to and a place where the previous owner...
