Recent content by jmk

  1. J

    55 hp flooding question

    Re: 55 hp flooding question okay looking at the 75/45 you do mean the plate right behind the switch. It didn't look like a plate to me in the picture, but when I go to the diagram that jerry is talking about the parts 44 -47 are right behind that electric switch. is this right? I don't want to...
  2. J

    55 hp flooding question

    Re: 55 hp flooding question I cant find the diagram your looking at. When I go to ********** and look up my motor they just have the carb and fuel pump no recirculation diagrams. What do you mean by 75/45? Hp?
  3. J

    55 hp flooding question

    Will bad reeds cause fuel to build up in the lower end. I have rebuilt the carb. Gas shuts off but while running it has fuel coming out of a small hole by the prop. When I stop it bubbles up in big white foamy globs spreading out at the surface with the smell of gas making a big slick. I mean a...
  4. J

    Chrysler 105 spark plugs

    Re: Chrysler 105 spark plugs some pictures
  5. J

    Chrysler 105 spark plugs

    I have been adding onto my thread in the prop section and decided to post here. Anyway. I went to four autoparts stores and they either didn't have the plugs or not enough of them. They all told me the champion spark plug book shows a different plug than a surface plug L20v that was in there...
  6. J

    Chrysler 105 hp prop question

    Re: Chrysler 105 hp prop question Here is the electrical system.
  7. J

    Chrysler 105 hp prop question

    Re: Chrysler 105 hp prop question
  8. J

    Chrysler 105 hp prop question

    Re: Chrysler 105 hp prop question
  9. J

    Chrysler 105 hp prop question

    Re: Chrysler 105 hp prop question
  10. J

    Chrysler 105 hp prop question

    I just got a chrysler 105 outboard motor. It came without a prop. Does anyone know what the diameter and pitch is standerd for this motor? Mine has the exhaust out the middle. I see they sell three different sizes here. I'm not sure what one to get. I will be useing the motor for fishing, and...
  11. J

    1971 55 hp outboard float? Gas leaking out of a small hole above lower end.

    I rebuilt the carb, but I can't find the float for this motor. Does anyone know if there is a compatible float I can cross with this? There is a lot of gas that floats up after shutting down the motor. It bubbles up from a small hole down by the lower end. Could anything else cause this other...
  12. J

    1971 55 hp pitted aluminum water pump.

    Hello all, jmk here and I have a question on the water pump cavity for my 1971 55 hp. Last year when I took the pump apart the wall on the inside of the pump where the impeller rides was just aluminum cast. It was all pitted. I lightly sanded it and with a bad feeling I put it back together with...
  13. J

    55 hp coil resistance

    My motor starts and runs. It cuts in and out and at times one cylinder seems to be lacking power. After running for a while it doesn't seem to get spark or enough spark, but I have not tested this. It gets to where it wont start and floods. One of my coils is cracked and I noticed when I got...
  14. J

    proper fuel mixture for 1964 5.5 Evinrude

    Hello all, jmk here. I bought a 1964 5.5 Evinrude last year. I am just getting it going. It came with a fuel tank which he said was fresh gas last year. He had wrote 25 to one on the tank. This seems to me to be a lot of oil. Does anyone know the proper fuel mixture? It seems to me that most...
  15. J

    5.5 lower oil seals

    Hello all, jmk here, and I am changing the lower end seals on my 1964 5.5. Is there a seal for the shifter? I'm not seeing what will keep the water out of the area that the shift linkage goes through. There is a brass bushing it slides through, and the book shows how to drive that out of the...
See more
Top