Recent content by JNOLLET

Hi, I am looking into a 2001 seadoo utopia 185. I thought the engine was the 200 DFI optimax but it turns out that its the 3 carb 210hp M2 engine. Does anyone have any info on reliability and fuel consumption regarding this engine? Any other thoughts? The boat is in good condition and I will...

Hi. Ive tried finding a replacement exhaust manifold (the old one was 20 yrs old) for my 1991 4cyl omc cobra SN#302BMRPWR. This is not the HO version. The PN for the manifold is 986984 according to OMC/BRP. All websites, except 2 i have found, say the part is obsolete. I have already ordered two...

I statred the boat for the first time this year. I have a 1991 3.0l HO omc inline engine with an omc outdrive. I just replaced the exhaust manifold and riser. It runs fine, keeps nice and cool but leaks a little water (drops at idle and small stream at higher rpms) from right around the back of...

Hi, I have been researching how to remove my omc concealed side mount control box for about a week now. From what I have read, it seems like all you have to do to remove the handle is put it in reverse and there should be a screw or allen screw exposed on the inside near the cables, remove that...

Hi everyone, this was the best place I could find to put this post. I know it's not a jetski but a boat with somewhat of the same drive. I am considering buying a 2001 seadoo utopia. Can anyone tell me what kind of fuel economy I will get with a 200hp direct injection optimax engine vs the 240hp...

Why can I not seem to find any info on the 2000 190 Chris Craft bowrider? I heard that they did not use any wood in the building of these boats and that is exactly what I am looking for. Chris Craft used to be the king of boats and I am wondering if this boat is worth considering. Are there any...

I was wondering if anyone knows if a 2004 180 four winns horizon has palstic seat frames instead of wood frames? I have a 91 180 freedom and almost all the seats have had to be replaced. I am looking to purchase the above boat and do not want to have to dea with rotten seats ever again. Do...

Hey all, I have another quick question. If I take a 2004 4.3 carb volvo four winns for a test drive, and it seems to run well, should I still do a compression test on all the cylinders? The only reason I ask this is because I would have to go out and purchase a tester and pull all the plugs. Is...

Hi, I am considering buying a 2004 4.3L carb volvo penta four winns 180 horizon. I was wondering if an hour meter is standard equipment for this boat. I have been looking at other pretty much identical four winns boats for sale and some have them and others don't. What's the deal? Is it optional...

Hi everyone. I decided to change my carpet on my 91 170 freedom four winns today. Sadly ( not really to my surprise), I found the plywood boards under the captain's chair rotten. It seems like the floor consists of there are 4 sheets of plywood layed up against composite (fiberglass). Does...

Hey everyone, I need some help. Yesterday I put my 1991 four winns 3.0L HO sterndrive omc cobra in the water and it would not start. After troubleshooting for a while I realized that it was because the shifter was not completely in neutral. I had to jiggle it like crazy to get it into neutral...

I am planning on changing my gear oil in my omc sterndrive and was just wondering what the difference is between evinrude/ johnson regular HPF oil, HPF Pro and HPF XFR? Thanks for your time> Sailor Jerry

I was wondering what is the best way to remove old wax that has been applied to the hull throughout the years? Will MEK work or is that to severe of a chemical to use? I also heard that maybe white vinegar would work. Any thoughts? Thanks guys! Sailor Jerry

I plan on ripping up my old carpet on my 1991 FW Freedom ski boat but don't really want to put carpet back down. I saw something called Seadek that seemed like a pretty good alternative. Will this stuff promote rot because it doesn't allow the wood flooring to breath? Any help is greatly...