i have got a 15hp mariner about 1979 when its idling the engine shakes left to right constantly when it gets to 3/4 throttle it tends to smooth out has anyone got any ideas??? I have replaced the points and condensors both plugs are sparking good
i have a mariner 15 and there seems to be no serial number anywhere on the transom bracket anywhere. the only number i can find is 682010 Y1 which is stamped on the engine block if anyone knows please help as not sure if it got right plugs in as it keeps spitting on tickover and doesnt seem to...
i have just purchased a 15hp mariner what is about 1985 age 1 month ago and have just got round to fitting it onto my boat it starts 1st pull but sounds like it only running on one cylinder i took it out and with wot there is no power and it tends to stall if i go from wot to idle this only...
ive just brought a mariner 15 and have noticed 2 wires sitting there doing nothing you can see them in the pic below they got a blue sleeving around them has anyone any ideas what they are for?
also does anyone no what year roughly this is as there is no serial number on the engine any help...
i removed my crankcase to check the reed valves and have now rebuilt the engine i was wondering if there was any base setting for the Maximum Spark Advance screw and the Maximum Neutral RPM Limiter Adjustment screw as i had to undo them to take cover off and like a fool forgot to measure them...
bit of a newbie question i own a 1978 9.8 mercury blueband and the reeds are sittuated on the crankshaft does anyone know exactly what they do as i got a prob with no fuel getting to plugs. the compression and spark is good
ill start at the beggining i got a 9.8 merc 2nd hand in a bit of a state it wouldnt start seemed to have good compression on pull start i replaced the switch box and had her running so i decided to give her a new lease of life and repaint it. i removed the carb off the block and took the block...
Hi I have a 1978 9.8 blueband merc outboard and it wont start. The plugs are continuously dry does anyone know that with the carb removed is the inlet meant to suck whilst pulling over?? if anyone knows can you let me know asap please as im trying to get on water this weekend ........Thanks
I have got a 1978 mercury 110 blueband and am trying to replace the cam-reverse lock which is situated behind the saddle on the mid section of the engine i have purchased the seloc manual and it doesnt say anything in there how to take the saddle off so far i have removed the 4 mounts and...
