I have a weld-craft 14ft jon boat that I want to mount lights on. I would use these lights for floundering. I am curios on what kind of lights to get (halogen etc.). Also I do not have a generator so power is an issue. I have 2 deep cycle batteries, but will be running the lights as well as...
I have a 1998 30hp 2-stroke Johnson motor and there seems to be a black substance that comes out in between the prop and the lower unit. I have already changed the lower unit oil and it looked just fine. The black stuff feels like oil but I don't know where it could be coming from. I was...
I have a 1998 30hp 2 stroke johnson motor and when in idle it tends to knock a little bit, both in makins a steady noise and in moving a little bit. Should I be concerned or is it normal? If it is abnormal what can I do to fix it? Is it the timing?<br /><br />Thanks, Nick
I have a 1998 30hp Johnson motor.<br />I took the lower unit off the other day and took apart the water pump to make sure everything looked okay. When I put everything back together and started the motor the propeller started to turn, there was also a rubbing sound. How can I correct this...
I have a 1998 14ft weldcraft boat. It still has the original green paint but it looks to be kind of oxidized. Should I prime it before I paint it or just rub it down a little with sand paper?<br /><br />Thanks,<br /><br />Nick
I have a 1998 Johnson 30 hp motor. I took the water pump off of the lower unit and noticed that the gasket was flaking off. Do I have to buy a water pump kit or do I just need to buy a replacement gasket. Also when I turn the prop by hand I can hear the impeller rubbing on something. What...
I have a 1998 30 hp Johnson motor. I was taking off the lower unit and when I disconnected the water pump I noticed that the gasket was cracked and flaking off. Should I replace the gasket or get a whole new water pump. Also after I put it back together and when I turn the propeller by hand I...
I have a johnson 1998 30hp motor and I cannot figure out how to take the lower unit off. While trying to take the unit off I removed a phillips screw next to the drain/fill plug and now this screw will not go back into place. Please tell me how to get screw back in and remove lower unit.<br...
