FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Today I attempted to winterize my 1995 mercruiser 3.0. I put fuel stabilizer in the tank. I ran fresh water through for 10-15 minutes. I then ran 5 gallons of antifreeze through at idle. During the antifreeze I fogged the engine at a higher rpm. After all that I drained the block and manifold...
On my 1995 3.0 mercruiser. I/O. It pulls to the right with the trim all the way down. But with the trim up at the 1/4 mark it's straight as a. Arrow. I already have the trim fin turned all the way to the left. Is there anything else I could adjust for the trim down position? Any recommendations?
1995 3.0 mercruiser LX. It seems as though my choke isn't functioning properly. I've had some issues on the water. The choke doesn't want to close back up. I read in another forum to clean the choke shaft with carb cleaner. Do I need to disassemble it from the housing or how should I do that
I have a 1995 3.0 mercruiser LX. I/O. Today after running for several hours we decided to start tubing. After cutting the engine off 3 or 4 times to let kids load and unload on the tube, the engine started dieseling the 4th time and now will not restart at all. I thought maybe the choke was...
Just got my first I/O. All i had previously were jet boats. It's a 1995 aquatron 3.0 mercruiser alpha one LX. Took it out for the first time. Starts quickly, runs great, idles smooth but I only get 2200 rpm unless that guage is wrong. Doesn't seem to be an engine issue. What could it be. Speedo...
