i have a 2004 200 hpdi yamie outboard. The tilt- trim switch has two parts to it ,one the elec. switch itself and a round piece of plastic that goes around the shaft. It is split and a screw thru it to tighten it down after you set it a position that will show on dash where motor is...
i have a teleflex gas gauge to replace the gas gauge on a ranger bass boat that has yamaha multi function gauges here is how i wired the new gauge
found the hot wire or pink wire from sending unit and cut it under dash and hooked to new gauge that has S TERMINAL then found a hot wire...
i have the digital gauges on a ranger bass boat and want to put a antolog gas gauge on do i have to change the sending unit also i do have a gauge so i asume just cut the wires from sending unit and hook them up to gauge and another from the + on battery is this correct if it works ok if not...
last year i bought two tm batteries from wallmart some say they have good luck others say they have a lot of bad luck looking at another combo battery for starting and all the electronics probably should get a 30 series for the extra power but what do you guys think about a wet cell or...
i have a 2002 ranger 195 bass boat it has yamaha digital gauges and the gas gauge does not register correctly. i want to put a teleflex gas gauge say like a # 68365p teleflex gauge do i need to change the sending unit for this gauge i would think it would be a good idea to change sending...
i have a 2004 yamaha 200 hpdi[small block] engine on a ranger 195 vs.having trouble with slippage or running out of water an a long curve at wot motor second hole from top. no jack plate. they tell me to change props? ihave a yamaha prop 25m they say go to a yamaha prop 25t-i does any know...
new member today i know i can learn a lot hope i can help some one . just a old retiered auto body shop owner that does nothing but bass fish<br />kbkindle :D
