94 evinrude 150. Had a new power head put on and new electronics. Rebuilt carbs. Smokes a lot at idle and runs ruff at mid range like its flooding. If I give her gas quick she bogs and then runs ok. When I am at full speed and slow down she runs ruff like she is flooding. When I slow down for a...
I have a 78 90hp inline 6. plugs from cyl 3 &4 were very milky 5&6 were not as bad and 1&2 had no problem.Do you think it may be water in my gas or exhaust jacket gaskets. I use this boat in salt water but I always run fresh water thru it. Thanks
The lower unit seals are leaking and need to be replaced.Can I do this without removing the bearing carrier? and if so how do I pull out the old seals.I know that if I remove the carrier I will need a puller.How hard is this job and can I do this myself? Any help would be helpful Thanks
The lower unit seals are leaking and need to be replaced.Can I do this without removing the bearing carrier? and if so how do I pull out the old seals.I know that if I remove the carrier I will need a puller.How hard is this job and can I do this myself? Any help would be helpful Thanks
I have a 79 inline 90hp.I changed the impeller today and when I started the boat up and put it in gear,to see if I did it right,it made a grinding noise when i shift in either direction. If I shift it faster in forward it makes a clunk. any help would be great Thanks
I have a 1979 Merc inline 6 90hp.Last year as the season went on I found it harder and harder to start my motor.I would run it for a while then sit and fish for about 45min and the motor was hard to get started.I was wondering if it could be from fouled plugs or somthing else.When I start her...
I have a 1980 L6 90 Hp merc. I have replaced all the coils. The #2 & #4 cyl no spark.Is it hte switch box or somthing else?The plugs look almost as if there is water mixing with fuel.The other plugs look fine.Please help Thank you
I picked up a motor thats is in good shape except<br />when you put it in forward the motor is in reverse.The guy who had this motor played around with it and had the lower unit off. How do I fix this? Iwas told there is 64 different ways this could be.The motor is an inline 6 outboard and the...