Hi, just wondering if anyone can tell me what year my chrysler 15hp is . I can't find the number except for 472712 on the inside of the cowl and when you remove the cowel there is a number 286038.
Cheers
I'm having trouble getting my waterpump to pump water. I put in a new kit but noticed that the key that holds the impeller on the shaft is worn out a bit and the Impeller seems to be a bit loose. Should it be loose a bit or should it have no play at all?
I have tried everything like flushing out...
Hi all, I was changing the water pump on 1971 18hp evenrude and was wondering if it is OK for the drive shaft to come out of the gear housing as it seems to be able to be easily pulled out?
I recently changed my water pump on a 1971 evinrude 18hp model 18102s after the old one stopped pumping water and it still doesn't work, however after i decided to check the thermostat I noticed that it didn't have one, does this affect the motor in any way or can i run it without one?
Hi there, I have a 1971 18hp Evenrude Model number 18102s and it stopped pumping water so i put in a new water pump and impeller but it still doesn't pump water, I noticed the little key on the shaft which slots into the impeller is a bit worn, could this be th problem?
I have a 55lb 12V electric outboard and would like to extend the power cables, just wondering what sort of electrical cable i would need to to do this.
Any replies would be much appreciated.
I have an old Fiberglass Yalta Craft boat, it is 11.75ft long and i have a 7.5hp merc on the back.
Does anyone know why my boat lifts up at the front when i am in top speed.
I have tried to trim the motor in a few different positions but it still seems to want to dig in at the back and rise at...
I have a 7.5 hp hanimex motor with an in built feul tank and when the motor is in gear and running it squirts feul out of the cap on the top of the motor, what could be causing this.
HELP HELP
I have a hanimex 1975 model 7.5 hp air cooled engine and the last time i took it out it seemed to go alright for a couple of minutes and then cut out, so i had to keep restarting it every couple of minutes.
Would anyone have any info on these old motors, would be much appreciated
I have a 7.5 hp twin cylinder thunderbolt 2 stroke, just wondering what year it? I have a serial number 019434, can anyone help with info on this motor