Recent content by Knotstrait

  1. K

    J6RCCS 6hp 1988 won’t start, which plug I should use? What’s the right Procedure to start it?

    Wha is that mean, I mixed too much oil?
  2. K

    J6RCCS 6hp 1988 won’t start, which plug I should use? What’s the right Procedure to start it?

    Yes, I got the knob and installed i, I don’t know if it pumped fuel, but I took out the brand new plugs after I pull so many times, it has the fuel on the tip of plugs, and the water bucket has a lot of oil/fuel in it.
  3. K

    J6RCCS 6hp 1988 won’t start, which plug I should use? What’s the right Procedure to start it?

    No luck, I try the procedure and installed the new plugs with 0.30 gap, still not startin, please help!
  4. K

    J6RCCS 6hp 1988 won’t start, which plug I should use? What’s the right Procedure to start it?

    the previous owner had the L87Y, I bought a new pair LCcJC4, what’s the right Gaps for it? It’s was about 0.20 ish, I read some articles says should be 0.30-0.40, would this be the reason I couldn’t start it? I posted a while ago, had questions regarding the oil mix ratio, and my motor started...
  5. K

    100:1 or 50:1?

    Yes, have the spark! So it’s good news for the compression test right? 98 is okay number ?!
  6. K

    100:1 or 50:1?

    I rent the test kit, it’s shows both cylinders are about 98 😅😅😅 I am happy now! How do I confirm the safety switch is working properly? I next plan is clean the carb again! I will post some pictures as I progresses, let me know if I done something wrong 🙏🙏🤣🤣
  7. K

    100:1 or 50:1?

    Thank you, I will take apart the carb and clean it/double check with it
  8. K

    100:1 or 50:1?

    I order the knob from eBay, it’s will arrive on 9/14 ish, I never took the primer apart, in order to take the big black box away from the carb, I had to remove the knob stick, my friend hold it for me accidentally kick it into water 😅😅 So what’s your guess? What should I do next?
  9. K

    100:1 or 50:1?

    Here are the pictures
  10. K

    100:1 or 50:1?

    Thank you, I did that, still wouldn’t start, I did spark test, it has electric, I bought the starting fluid to try, it still dead, I can’t find another test kit for the compression test today, may be have to ask my friends! Should I take apart the carb again? When I pull the rope it’s dead...
  11. K

    100:1 or 50:1?

    is the #33 low speed screw? Or #15? how do I adjust it right? I had it turned tight😅😅😅 compression test I did it 9 pulls
  12. K

    100:1 or 50:1?

    The problem is, it won’t start😣😣
  13. K

    100:1 or 50:1?

    What if it is 68 of compression on both cylinder? what should I do?
  14. K

    100:1 or 50:1?

    I have a Yamaha 8hp, it runs on 100:1, many years, no problem with it!
  15. K

    100:1 or 50:1?

    The video was before I took it to marine, it ran good! The knob I lost was the primer pump stick looks like choke knob, I thought it was choke
See more
Top