I was hoping someone could help me with syncing my carbs as I do not have a service manual. Had to pull the carbs off and clean as they were full of junk from setting to long. It runs good but after disassembling the carbs I want to make sure everything is set properly. Thanks for your help
Yesterday was running along and was up in the tower and my son yelled to me the motor was making noise. I looked down and while throttling back checked to see if motor was peeing, and it was. At idle it started making clunking noise so I shut off motor. looked the motor over didnt see anything...
My buddy has twin 250's on his boat and one of the motors does not "pee" when you hook it up to a hose to flush. Water pump works fine and "pees" when running. He took it to the dealer and they "fixed it" but it still does not "pee" when hooked to a hose. We did find out that if we start the...
Rodbolt I hope you can help. I have recently experienced a problem with tilting my motor as it is binding on one side of the brackets when they come together when tilting/trimining. The brackets I am refering too are the transom brackets that hold the engine on the boat and the bracket that is...
As I look at the parts list for the water pump impeller I see 2 listings, 1 for serial # below 21500 (black bushing) and # above 21500 (white bushing). Anybody know the difference and what would happen using the different one. I have a white bushing impeller and need the black bushing impeller...
Hi guys,
Have 200 ox66 with a shutdown problem at full throttle. Will run all day great but when you go full throttle up to 5300 rpm after about 20 seconds the motor will just shut down. It starts right up and will run great. Any Ideas?
Thanks
Andy
