Recent content by lakenormangal

  1. lakenormangal

    Glastron gx 185 early 2000s

    I'm thinking of upgrading from the old 1990 Sunbird. I've been looking at 2001 to 2004 Glastron gx 185's. I've had the Sunbird for 4 years now. It's a great little boat when everything is good. But it seems like each year, something major breaks on it. 2014 the shifting cable was wonky and had...
  2. lakenormangal

    OMC Cobra 4.3 model number question.

    I need to replace the outdrive on my 1990 OMC cobra 4.3. The model number is 986032. I found an outdrive off of a 4.3 the model number on that one is 984541. From what I found out by researching it appears to be from a 1987 model. Can I use the one that I found? Are the gear ratios the same for...
  3. lakenormangal

    OMC Cobra Outdrive question

    I have a 4.3 v6 Cobra. The outdrive is shot ( someone did a patch job on the case years before I got it and the patch gave it up on the lake one day and well, now the whole thing is toast. BTW, they put a ton of paint on it and neither me or the previous owner had any idea it was there.)...
  4. lakenormangal

    Sunbird Neutral Safety Switch question

    Boat has been running great! Then last night took it out for a cruise and on the way to the dock, throttled down and the motor cut out. Docked the boat and tried to start it. Engine cranked and didn't start. Moved the throttle to give a little gas, turned the key again, this time, nothing at...
  5. lakenormangal

    Sunbird Gas Tank Check Valve

    Last year we noticed there was gas weeping through a minute crack between the bilge and the fuel tank compartment. There were no problems with any leaks on hoses or pumps in the engine bay. The only way to get to the fuel tank was the cut a hole in the deck. As it was the end of the season, we...
  6. lakenormangal

    Marine Supply Store with best selection of Fuel Tanks- Re: 1990 Sunbird 4.3 OMC

    I need to replace the fuel tank on our 1990 Sunbird Corsair. The place where the tank fits is very specific for shape and size. The well it sits into is molded in fiberglass and it really limits the size and shape of replacement tank choices. I've looked at a number of marine supply stores, and...
  7. lakenormangal

    Best Lube to use for outdrive

    I need to get some grease for the outdrive on my Cobra. What is the best grease I should be using and I can I also use to grease the Bearing Buddies in my trailer wheels? Thanks!
  8. lakenormangal

    OMC Exhaust Flapper/Seal Question

    I need to order two new flappers. I have been looking around and are there different sized flappers for the 4.3 HO? Or are they the same size as the regular 4.3?
  9. lakenormangal

    Cooling System Questions

    I have a 1990 Sunbird with an OMC Cobra 4.3 HO. Changed the alternator and fired up the boat with the muffs on it and everything seemed fine. Temp was normal. Got it out on the lake the other day and it overheated very quickly. I probably shouldn't have taken it out on a such a busy day, there...
  10. lakenormangal

    Prestolite vs Mando Alternator OMC Cobra

    Other than the terminal labels ( for example instead of G for ground, Mando has E for earth), what is the difference between these two alternators? Is there anything internally that is different? Output, ect? I know the Mando alt I have is a 55 amp but from what I had researched the older...
  11. lakenormangal

    Alternator hookup on Sunbird OMC

    I have a 1990 Sunbird with a 4.3 OMC and I bought a new alternator. The new alternator is a little different and it's very unclear what goes to what. We know where the positive goes, but the other 3 leads are confusing. I'm not the mechanic but my brother and bf are working on it and they are...
  12. lakenormangal

    Quicksilver Black Diamond prop results

    Got the boat out on the lake this weekend after installing the Quicksilver Black Diamond prop. Went with the same specs as the old prop 14.25 x 21. Well it feels like a 19. The boat snaps up on plane twice as fast as it did with the old prop. It's revving higher. It used to be about 4600 wot...
  13. lakenormangal

    Torque prop nut?

    I've not replaced a prop myself but two of my friends have. One tells me that the nut does not need to be torqued. The other friend says to torque it. Does it need torqued after I install the new prop and if so, how do I find the setting for the torque wrench?
  14. lakenormangal

    Michigan Wheel Vortex or Quicksilver or Hustler Prop?

    Ordering a new prop for the little Sunbird I have, 18 ft, 4.3 V6, Cobra outdrive. I hit rock yesterday and its time for a new prop. 14 1/4 dia and 21 pitch. I want to keep a good cruising speed, so I'm staying with the 21 pitch. I might get a 19 later if I start pulling tubes or wakeboards a...
  15. lakenormangal

    Boat cover question

    Well I'm back, and having lots,of fun with my little Sunbird Corsair. In fact, I'd like to keep the boat at our dock this,summer. I need a good cover for the boat while its docked. It does not have a snap on canvas cover. In fact the only snaps on the boat are along the windshield. What are the...
Top