LReed27's latest activity

  • L
    LReed27 replied to the thread Knocking when turning.
    We have hit the gimbal bearing all around but it still won’t go in. I think we’re just going to give up and sell the boat to someone for...
  • L
    LReed27 replied to the thread Knocking when turning.
    We have done very light grease and it is still not going in. It feels like it’s hitting something metal but the splines look fine and we...
  • L
    LReed27 replied to the thread Knocking when turning.
    I’m not actually sure if we had our orings greased enough, I’ll pay more attention to those when we try tonight. We have been making...
  • L
    LReed27 replied to the thread Knocking when turning.
    So we took the outdrive back off and found that we were able to get the bearing in more. And we checked alignment after and the tool...
  • L
    LReed27 replied to the thread Knocking when turning.
    Yeah we measured where the old one was and then drilled the hole to line up with that. Then with it lined up, we used that to hit the...
  • L
    LReed27 replied to the thread Knocking when turning.
    Would that be something that could be tightened or something or would I need to replace them? I’ve seen things about using clamps to get...
  • L
    LReed27 replied to the thread Knocking when turning.
    I’m thinking u joints but hoping for something easier 😂
  • L
    LReed27 replied to the thread Knocking when turning.
    Yeah, it did in neutral and in gear.
  • L
    LReed27 posted the thread Knocking when turning in Mercury MerCruiser Sterndrives & Engines.
    Attached is a video I took of our boat on the water. We recently replaced the bellows, gimbal bearing, and the shift cable. We used the...
Show older items
Top