I have a 1997 Evenrude 175 SLEUC.
I replaced the VRO last summer, all works as it should. My problem is the "No Oil" light on the system check remains lit.
Background: In testing the VRO failure last summer, I disconnected the sensor on the motor which set off the No Oil light. Once the...
I have this motor almost where I want it to be. I have one remaining issue. The motor idles a little low under load. I need to increase the idle rpm by about 1 or 2 hundred. I cannot find an idle speed adjustment to save my life.
Again, any and all assistance is greatly appreciated.
My Looper is on the fritz.
On the above noted motor I have recently rebuilt all six carburetors with OEM rebuild kits, replaced the plugs and decarbed the motor. The motor has run extremely well for the last 50 hours or so since the carb rebuild. Monday I took the boat out and a new...
1997 Rude 175 looper SLUEC "Trick Question" meaning I probably know the answer
I just need to bounce an issue off of someone else's head. Your input is greatly appreciated.
I recently rebuilt the carburetors on the above noted engine. When doing so I removed the intakes and cleaned and...
Hello all,
I am about to change the jackplate on my boat. In doing so I will need to remove the existing motor/JP from the transom. My question is, where is the lifting point on my motor. There is a small loop at the top of the right cyclinder but looks a little light in the shorts to hold...
