Bought the boat 2 months ago the spedo never worked it is a paddle type sending unit with 3 22ga wires and a ground that terminate under the dash, the previous owner hacked up the wiring pretty good so I'm putting it back to better than new. The trouble is I can't seem to locate any wiring...
good afternoon,
I'm going to tear into my carb after work and throw a rebiuld kit in it. Replacing seals and gaskets is no big deal but I'm wondering if anny one has any advise on setting all my adjustments after I'm done. Seeing how I'm in my driveway and not on the water with the boat under a...
good aftenoon I have a 1989 Mercruiser 3.0, I was on the water a few days ago and went to pull anchor and restart after sitting for about an hour and the starter solenoid clicked and the voltage guage dropped to about 11.5-12v but no cranking i assumed a dead battery but I cleaned all the...
good aftenoon I have a 1989 Mercruiser 3.0, I was on the water a few days ago and went to pull anchor and restart after sitting for about an hour and the starter solenoid clicked and the voltage guage dropped to about 11.5-12v but no cranking i assumed a dead battery but I cleaned all the...
Good Morning,
First time posting so dont chastise me if I screw this up, I have a 17' Dynasty Regency with a 3.0L MerCruiser Alpha One. When running at WOT my tach is showing 6000 RPM, all the advise that I have found says that I should be at 4400-4800 I believe that my tach or sending unit is...
