Mc Tool's latest activity

  • M
    Mc Tool replied to the thread Oil 4 stroke Mercury 115hp.
    I think its more about what the engine is designed to do . An R1 yamaha has 200 hp (@13500rpm) at the wheel and is only 998cc , spec...
  • M
    Mc Tool replied to the thread Oil 4 stroke Mercury 115hp.
    Yeah ok what revs is your boat doing at 75 mph.....all day, and anyhow its not about the revs . If you over rev anything it will blow...
  • M
    Mc Tool reacted to airshot's post in the thread Oil 4 stroke Mercury 115hp with Like Like.
    I will add this.....go to the Eway and get on, leave your car in first gear and go cruise at 70-75 mph all day. Lets see how long your...
  • M
    Mc Tool replied to the thread Oil 4 stroke Mercury 115hp.
    😁If your trying to get me to say "thats not comparing apples with apples "...... Im not going to ......so there😆😆
  • M
    Mc Tool replied to the thread Mounting bracket for j200.
    No not at ³/¹⁶ " bigger .....hell I wouldnt even mill them ....you got a round file ?. De-burr the edges and get some heavy duty ( like...
  • M
    Mc Tool replied to the thread Oil 4 stroke Mercury 115hp.
    Im thinking this has to be a rhetorical question (there are to many variables to give a concise answer ) ,but I do see where you coming...
  • M
    Mc Tool replied to the thread Mounting bracket for j200.
    Ok , your kinda stuck with the bottom holes as they go thru the transom and if they are not right for the new motor ( not the bracket )...
  • M
    Mc Tool replied to the thread Oil 4 stroke Mercury 115hp.
    I have never bought a new motor so Im not tied in by any warranty . I have had this argument/discussion many times . While I understand...
  • M
    Mc Tool replied to the thread Oil 4 stroke Mercury 115hp.
    Mmmmm🤔 I wonder who makes that Mercury quicksilver oil for them .
  • M
    Mc Tool reacted to tphoyt's post in the thread Mounting bracket for j200 with Like Like.
    I’m with Crosbyman. I’d fill the old holes with an epoxy filler and start fresh to help keep any water out of a sloppy hole.
  • M
    Mc Tool replied to the thread Exhaust manifold discovery?.
    Yeah , Ive always been at a loss as to why anyone wouldnt run proper coolant thru a heat exchanger . I wouldnt put salt water in my car...
  • M
    Mc Tool reacted to Lou C's post in the thread Exhaust manifold discovery? with Like Like.
    Low maintenance boat = outboard Raw water cooled I/O = unforgiving of even 1 mistake Closed cooled I/O is better but there'd still be...
  • M
    Mc Tool replied to the thread Mounting bracket for j200.
    ⅜" aint a lot ,can you post a pic of the bracket ....so we can see if there is enough " meat" there to slightly elongating the holes...
  • M
    Mc Tool reacted to Crosbyman's post in the thread Mounting bracket for j200 with Like Like.
    somebody Knows. me I would seal existing holes with silicone or epoxy and drill new holes where they are needed.
  • M
    Mc Tool replied to the thread Just thought I'd share a nice photo..
    Yeah but they are not unmanageable and they get you into some premo fishing areas , lot of peeps wont use them so you usually have it...
Show older items
Top