I just filled my omc outdrive with gear oil this evening from the bottom. can anyone tell me if this was wrong. reading my manual it says to fill it from the middle.
Ok just got this boat back from the shop for a third time. I have a 1989 four winns 4.3 OMC. This time it was leaking gear oil from prop. Shop says they fixed the leak. Took it out Saturday and it ran fine. Parked in the drive left it overnight. Didnt leak. Came back yesterday from the...
Noticed a puddle of yellowish milky oil on the ground after pulling it from the garage. Took the boat yesterday to the mechanic who installed a water pump 2 months back and he drained the oil and did a pressure check and didnt see any sign of the leak. He did see the gear oil when looking down...
omc still not starting
Ok I took my boat to the shop because after taking out the old depth finder the boat would not start. Its a 1989 four winns with a omc 4.3. The guy at the shop where it is currently says he put the wires back and gauges are working but the boat still wont start. I'm out...
Ok I took my boat to the shop because after taking out the old depth finder the boat would not start. Its a 1989 four winns with a omc 4.3. The guy at the shop where it is currently says he put the wires back and gauges are working but the boat still wont start. I'm out 200 bucks at this poiint...
The gauges on my 1989 four winns wont work. Could there be a fuse out somewhere besides the fuse panel by ignition. I read where there are some fuses by the engine but cant locate them. I unhooked the old depth finder and reconnected it. Im wondering if i have the wires crossed now. I have...
I have a 1989 four winns with an ignition showing the B S I terminals. My husband whos not to good at wiring disconnected the trim and old depth finder to install a new depth finder and unfortunately did not make a diagram of where the wires go back. We have looked for a diagram and even have...