Recent content by met128

  1. M

    No warning system and loss of power

    This is the first motor that has stumped me in a year. Let me give u a little history of this motor.<br /><br />2001 Johnson optical ignition 115 <br /><br />Repaired items : <br />Water pump (Needed it)<br />Reg (Was on fire)<br />Fuel System including Vapor Sep<br /><br />Problems:<br /><br...
  2. M

    94 Merc 200 LowerUnit stuck

    After removing all the bolts that hold on the lower unit. I cant get the LU off. The stud in the front of the LU is locked up in the midsection casing. I tried heating, hammer, prybar :confused: and brake fluid. The LU just wont move. I think I should try to cut the stud and dowel. Any other...
  3. M

    Air/Fuel adjustment Suzuki

    Does anyone have the # of turns for the air/fuel adjustments on an 88 Suzuki 150. :confused:
  4. M

    88 Suszki 150 prime problems

    New problems with this motor.. After rebuilding the carbs, one fuel pump, and primer. The prime ball gets soft after only minute or two with out the motor running. If the motor is runnig it will loose prime right away. I removed all the carbs and could not see any gas coming out.
  5. M

    1988 Suzuki 150 ignition problems

    After rebuilding the carbs and the fuel pumps the motor won't start. I checked the plugs and they are wet. So fuel is there. I had this motor running two days ago but noticed fuel coming out of the bottom carb. I noticed today that the spark was very weak and the motor would not start. Is there...
  6. M

    1979 Merc 402

    Whats yalls thoughts on Merc 402...I have found one for a very good deal. My frind has the 50 and says you can't kill it. :D
  7. M

    1988 Johnson 110

    My motor shorts out a coil when the cover is on. I just replaced the coils, Wires, CDI pack. Now I can't get the motor to run right with the cover on. Has anyone seen this problem. I have moved the plug wires every direction, still shorts. Any suggestions would be helpful. :confused: :confused:
  8. M

    Johnson 110 High Idel

    I have a 1988 Johnson 110. I just replaced Coils,CDI,plugs,wires,fuel pump, and rebuilt the carbs. I resolved my ignition problems but I am having trouble getting my motor idel right. The motor is hard to start even after turning the lever on the primer solenoid but after I get it started and...
  9. M

    86 Mecury Black Max 150

    I have a problem with the motor not making power when in gear. In N the motor runs great but when you put a load on it (in the water) it has no power. I just replaced the water pump and did a oil change. I am in the process of changing the fuel pump gaskets. I have checked the compression on the...
See more
Top