Recent content by mosalf

  1. M

    4HP 1982 Evinrude not starting

    I picked up a 1982 4HP Evinrude which the previous owner said was running before he put it to rest because of health issues. I changed the oil in the lower leg since he had drained it and there was only very little oil that came out with some black carbon soot or similar thing. I pumped new oil...
  2. M

    4HP 1982 Evinrude not starting

    I picked up a 1982 4HP Evinrude which the previous owner said was running before he put it to rest because of health issues. I changed the oil in the lower leg since he had drained it and there was only very little oil that came out with some black carbon soot or similar thing. I pumped new oil...
  3. M

    AMS Oil 75W90 or Evinrude Lower Unit Gear Oil

    Hey I got Wallmart oil 80W-90 GL5. Will this work. Can anyone share the procedure for changing oil? I got the Supertech Gear Oil. Please advise if I can use this oil on a 1982 4HP Evinrude as well as the 1964 9.5HP evinrude. Look forward to your comments.
  4. M

    AMS Oil 75W90 or Evinrude Lower Unit Gear Oil

    Wanting to replace oil on my 1964 9.5HP Evinrude. Which oil should I go by? Amsoil is almost half price to the Evinrude Oil, however I will depend on you guys to give me the best solution here.
  5. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    Hi, I am based in Calgary.
  6. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    I ordered it on Ebay...should have checked here first.
  7. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    Well that's a shame...do you if any other year skeg will fit?
  8. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    How do I repair the skeg? It's a crack. No holes. Lol someone suggested rubbing a soap bar into it and if no oil is oozing then putting a butyl rubber tape. I don't want to spoil it any further. From the condition, seems previous owner has used some sort of epoxy or jb water weld. Total newbie...
  9. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    Can I replace the skeg with a 15HP 1956 FD-10 Evinrude skeg?
  10. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    You are correct. It's a 9.5
  11. M

    Evinrude 10HP 1964 motor needs skeg repair or replacement.

    I recently grabbed a 10HP evinrude thinking it was a great purchase. The PO mentioned that it has a skeg issue - a crack and he was willing to give the motor at a good price which I accepted. He mentioned that he ran the motor and had mended the crack but it has started to flow again so he...
  12. M

    Intex Excursion 5 - Inflated Dimensions

    I have an Intex Excursion 5 and a Sevylor Fish Hunter 360. I was trying to modify the IE5 to fix a 3.5Hp outboard weighing approx 15kgs. Has anyone done this here? Also does anyone have the complete inflated dimensions to share? Including bow and stern dimensions?
  13. M

    Sevylor HF-360 Floorboard

    Hi I am not sure if you actually built your floor board. I bought a used HF 360. Need to know how to build the floor board and also make motor mount for it.
See more
Top