muc's latest activity

Something else just popped into my head. I have very little experience with non OEM props. You have a non Mercury prop. I don’t sell...

I thought you said you dropped 2” in pitch? Generally speaking, a little boat like this, that should have a 19” prop will become a dog...

My money is still on. propping starting voltage fuel

My guess is that vacuum changing fuel pressure by about 10% isn't going to change GPH by 30%. Excessive fuel use is a symptom, not a...

Misfire counters show up in Diacom, but because this engine doesn't have a cam sensor and cats --- any info you see will be bogus. This...

For people following along, I would never advise a cylinder drop test be done by pulling spark plug cables on a EFI engine. Unless you...

A few things I should point out for future reference. @damo79 has a DTM engine not the DTS engines that @tpenfield has. A DTM engine has...

First --- thank you @Biz603 for responding! Did you put the boat away with some sort of stabilizer of conditioner in the fuel? And maybe...

No I can't, sorry. I understand your desire to see some published MAP numbers from MerCruiser --- I would to, but they don't that I can...

Hey Ted, Are you using the graph function to see these numbers?

Thanks again for your time. Next Diacom recording I will get will be done with good battery. Guess if it will still drop below 11V I...

Yup, my claim to fame was two things. I have made or seen just about every mistake ---- once. I could handle the most "troublesome"...

I don't see this as a waste of time. I look at it as a learning experience. Hopefully people who read this thread will see the...

Have you ever been part of a boat test for a magazine? I have, and I sure wouldn't use what they published as a substitute for actual...

But it is an modern engine, it doesn't need knock sensors for one thing. First, there is a possibility those numbers are corrupted...