I have a 1995 Alumacraft Phantom 185 it leaks after tearing the thing apart to find and fix the leak in the livewell line it is still leaking, I don't see any loose rivets or rust on the rivets, do you guys in the boat business have any old Indian tricks for finding leaks??? yes the plug is...
I have the new this year Matrix 67 Humminbird gps/sonar<br />the screen refreshes every 15-20 seconds while in the gps mode only, Is there a setting I have missed to stop this b---sh-- and it only does it while in the gps mode only, sometimes the screen comes bach missing important details like...
I have a 1999 v-max 150 p-150 TLRX motor for sale mint condition except for the blown piston which sent a small hole thru the block,<br />All parts are for sale minus the lower unit, the motor was mint cowl etc like new.<br /> e-mail me at hockeyman36@rogers.com
Hi guys can anyone steer me to a lower unit for my 1995 Pro V yamaha mine is screwed as per the marina, The only problem I live in Orillia Ontario Canada, I will take aused unit if it is mint or a rebuild or new... HELP HeLP
Rodbolt I see that you are in the house tonite<br />Can you help me with my Pro V150 oil leak post[previous] You helped me last time with a throttle linkage problem Thank You for that also..
I went to check on my lower unit oil tonite and found that it has turned brown from the original green colour[Mercury Synthetic] new in the month of April and also discovered a small crack on<br /> the top of the lower unit where the prop is recessed into the casing, [sorry dont know the part...
I have a 1995 yamaha pro v 150, runs excellent except for a small hairline crack in the lower unit about 3/4 to 1 inch long which appears to be on the surface where the prop sits inside the lower unit, right where the round housing goes into the straight vertical part of the lower unit<br...
HI GUYS I HAVE PURCHASED A 1995 YAMAHA 150 PRO V , THE PROBLEM IS THE SPEEDO AIR TUBE IS CUT IN 2 PLACES AT THE BOTTOM OF THE MOTOR.<br /> HOW DIFFICULT IS THIS TO REPLACE,?<br /> AND HOW IS IT DONE? THANKS
hI THERE GUYS, I HAVE A YAMAHA 1995 PRO-V 150<br /> ENGINE IS IN MINT SHAPE, BUT I HAVE A QUESTION<br /> WHEN I SPIN THE PROP IN NEUTRAL I HEAR A GEAR OR CLICKING NOISE, IS THIS NORMAL FOR LARGER ENGINES? OR IS THERE A PROBLEM WITH THE LOWER UNIT?? tHANKS
Yamaha Speedo
Same guy 1995 yamaha 150 v-6 speedo does not work.. There is a reading of 4-7 moph. and the other functions of the gauge work . Could ther be a broken wire ? Ialso noticed that the small tube that runs down the lower unit is broken in 2 places.[Just bought the boat} what does...
I have a 1995 Yamaha TLRT 150 on an Alumacraft Phantom boat, one problem the boat does not reach full rpms 4600 on digital tach. Which prop would I use ? The current prop is 13 3/8 x 25 which I know is limiting the engines rpms by 800 or so..<br /> The boat and motor weigh approx 1800 lbs and...
I have the 70 hp Johnson 1990 year, the tach is stuck at 6500 rpm but backs down to 6000 when power is applied to the key, Is this thing baked?<br />or can it be repaired for under 150.00[cost of new one] :D
