Recent content by mznewman

  1. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips @mrdrh99 I have a 50lb Minn Kota Riptide with a grp 29 Marine Batt from Walmart. Its fine for calm waters, but its the wrong equipment for running on rivers or rougher bodies like a windy Bay / large Lake (I've tried it). You really need flat waters...
  2. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips Loop_Dad, If you are using carpet, and wrap the edges, there is no need for pipe insulation. If you are just using painted plywood (1/2", 5/8", or 3/4"), with no carpet, you can use a machine sander (belt sander is best) to take off the 90degree...
  3. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips After doing some research on the larger (8-10person) zodiac and saturn inflatables, I was asking myself the same question. I like to fish with another person, which makes a simple task of carrying the M4 to the water, but there are times when its only...
  4. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips All valid points. I feel the same way. Although I have an SUV and the boat, floor, motor, battery, and seats all fit while still leaving the back seat open for passengers... I will sometimes use my trailer-hitch-cargo-carrier ($89). Super light and it...
  5. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips I mounted it on the TM. But did not try it out yet. TM mount was recommended by Garmin. Desode's idea to zip-tie to the rear handle is good if you are using different TM's or a gas OB motor. That way the transducer stays with the boat, not the motor...
  6. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips Thanks... its the same as yours but with red seats ;-) I don't know how you feel about the location of the oars. I hate how they sit so high up on the chambers (When not in use). Some other inflatables have holders on the sides, leaving the top...
  7. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips @Q-ban 1) I used Helmsman Satin to seal sides and edges of my 5/8" ply floor. You can use a router with round-over bit or hand belt-sander. Either will take away the splintering ply edges quickly. Belt sander with 80grit will grind the ply edges no...
  8. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips I think you're right. I am going to try that mount location first since the TM is the only motor I have. If I get an outboard, then I'll zip it to the rear boat handle.
  9. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips ok... The factory fold is taking the right and left side and folding it so that the Red Rock-guard strip from each side meets in the center-line (center-line is front-to-back) with no overlap. Then, from each end, take about 16" and start folding...
  10. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips hi da_q-ban_one, Does that connecting PVC arm control movement up/down only? Regarding the M4 ... I would love to see the speed limitation of the M4 solved in a way that is elegant and does not introduce any additional deterrents for assembly. I...
  11. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips @Desode ... did you ever see this anchor configuration? Palmetto Kayak Fishing: Quick release DIY kayak anchor system + bottle opener Its for a Kayak, using a trolly to manage your angle. Clever, and a subset of this design would also work for M4's...
  12. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips Muskies are rare in my area now. When I was a kid you could catch them. Even in the Delaware. I need to take a fishing/camping trip to Canada, with the M4 :). I ended up getting the anchor from K-Mart. I went there to pick up braided line and saw it...
  13. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips I used a spoon lure. Odd... I never catch channel catfish on a lure. In the past, only worms, off the bottom. I didn't keep it. I just don't feel comfortable eating the fresh water fish in this part of PA. I am between NYC and Philadelphia, a bit...
  14. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips @Desode. Thanks for the great details. Great info, and very nice video of the un-boxing. I was looking for a companion tube or boat for the M4 so that I can accommodate other family members when needed. The M4, with my fishing mods, are good for 2 or 3...
  15. M

    Intex Mariner 4 modifications and Tips

    Re: Intex Mariner 4 modifications and Tips Ah... Desode, Founding Father of this Thread. Thanks for the reply. 6HP? Do you still make use of the M4 with the 6HP? I saw some older pics of the floor anchored mount. That design does make sense. Do you deploy with both motors or just one at a...
See more
Top