nola mike's latest activity

  • nola mike
    nola mike replied to the thread Mercruiser 3.0 overheated, Is my motor shot?.
    already established that the compression test wasn't ok...
  • nola mike
    nola mike replied to the thread Fuel Tank incorrectly labelled?.
    You could also have a crack/hole in the pickup such that it won't draw when the fuel is below the level of the crack. Easiest would be...
  • nola mike
    nola mike replied to the thread Shift cable bellows..
    Good to hear, easier to see what's going on when you're in there.
  • nola mike
    nola mike reacted to alldodge's post in the thread Bizarre IAC reading with Like Like.
    Right now I don't think you have an issue to worry about. As for adding sensors, I wouldn't do it even if wires were available, more...
  • nola mike
    nola mike replied to the thread Bizarre IAC reading.
    idk. yeah you'd think the idle would increase or there'd be rough running. then again you say it's fully open but screenshot is fully...
  • nola mike
    nola mike replied to the thread Bizarre IAC reading.
    Vacuum on my last 2 engines have been comparable to car values. I'm 18 mmhg at idle, but you need to make sure that timing and idle are...
  • nola mike
    nola mike reacted to Bondo's post in the thread Shift cable bellows. with Like Like.
    Ayuh,....... Even if you didn't touch the lower shift shaft, it moved into neutral, or beyond, just by the nature of the...
  • nola mike
    nola mike replied to the thread Shift cable bellows..
    Still don't think you're getting it. You need to have tension on the prop and lower shift shaft AS YOU REASSEMBLE. Let's make it simple...
  • nola mike
    nola mike reacted to Scott Danforth's post in the thread Cobalt 226…Adding underwater exhaust with Like Like.
    easiest way is to add turn down tips.
  • nola mike
    nola mike replied to the thread Shift cable bellows..
    well, no, but without the prop locked the shaft will slip and flop around a bit.
  • nola mike
    nola mike replied to the thread Shift cable bellows..
    But are they mated correctly? They both need to be in the same gear when mated, which is why the prop needs to be locked.
  • nola mike
    nola mike reacted to tr@v1s's post in the thread Boat had been stored for 19 years with Like Like.
    Thanks for all the input guys!! So much good info here. I figured when buying it that the first thing was the trailer and outdrive...
  • nola mike
    nola mike replied to the thread Shift cable bellows..
    Not sure if we're all just misunderstanding or you are, but if the lower is not in forward gear but the upper is (ie the shaft is facing...
  • nola mike
    nola mike replied to the thread G3 Boat.
    https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.g3boats.com/wp-content/uploads/2024/06/G3_Fish_Boat_OM_WEB_...
  • nola mike
    nola mike replied to the thread MC-1 Drive Dog failure?.
    That cable needs to have nearly zero resistance to work right before strange things happen. It has to really bind to trip the cutout on...
Show older items
Top