Nordin's latest activity

  • N
    Nordin replied to the thread What year?.
    Would guess 1995 and newer. Mercury stop build Force after 1999.
  • N
    Nordin replied to the thread 1974 35hp Chrysler. Battery ignition..
    357HE is a 1974, 35Hp from 1976 and later I believe and from the 25, 30, 35Hp family you just set the points gap. No fine tuning at a...
  • N
    Nordin replied to the thread 1974 35hp Chrysler. Battery ignition..
    If it is a 1974 year model it is from the engine family 35-45-50-55Hp. All things on the engine was swapable to the different horse...
  • N
    Nordin reacted to Chrisham's post in the thread 1976 456hh 45 hp.magneto model with Like Like.
    Sorry for the late reply .I finally got some new coils as mercury made some.I relaced both and the Ole 45 is running great thanks...
  • N
    Nordin replied to the thread Cracked bearing carrier, run or replace?.
    Yes as racerone says, when installing the carrier you have to turn the crankshaft or the prop shaft sligtly. The revers gear and the...
  • N
    Nordin replied to the thread 1974 Chrysler 135 hp limping.
    That clean head can indicate water intrusion in the cylinders. Head gasket looks fine BUT you may have a crack in the water jackets and...
  • N
    Nordin replied to the thread 1974 Chrysler 135 hp limping.
    WinnerCougar74 looks like pre detonation has damage one of the pistons and lean mixture or clogged carb damage the other. Maybe some...
  • N
    Nordin replied to the thread 1987 Force 50hp head warpage..
    Yes like racerone says. Resurface it at a piece of glass and water sanding paper. sand it and do it in a 8 pattern way. Check it with a...
  • N
    Nordin reacted to KXP's post in the thread 89 force tilt and trim valve body with Like Like.
    I went ahead and put the old o ring and the gasket and it worked it stayed up didn’t drop at all. Thanks
  • N
    Nordin reacted to racerone's post in the thread 1983 Evinrude 15 how to remove drive shaft with Like Like.
    Have a 79 model with same issue here.------Took engine apart.---May cut / grind the crank to save the shaft.-----The splines should be...
  • N
    Nordin replied to the thread Evinrude 7.5hp kill switch issue.
    Yes, Crosbyman is right about using the old method to choke it until it stops. Two ways to go, change the CDI pack or use the one that...
  • N
    Nordin replied to the thread Mercury thunderbolt 500.
    Agree with you Jimmbo, those red and blue decals from 1968 to 1975 are the best looking Mercurys. Have three of them myself, 1970 500...
  • N
    Nordin reacted to jimmbo's post in the thread Mercury thunderbolt 500 with Like Like.
    Based on the Cowl and Faceplate Decals, I'm almost 100% certain it is a 73 A 73 has Mercury Marine on the Face Plate, a 72 would have...
  • N
    Nordin replied to the thread Force 40 shifting problem.
    Unhook the remote cables and check if both cables moves as they should. Check the linkage at the engine if something is stopping it to...
  • N
    Nordin replied to the thread Evinrude 7.5hp kill switch issue.
    That engine suppose to have CDI ignition and you kill it by grounding the pack out. If it does not stop when trying to kill by the...
Show older items
Top