Hi all, I've a 1976 Evinrude, model 35602G. After replacing the plugs and cleaning the carb it started right up but now it seems to be missing. I bought a manual on ebay and was planning on replacing the points and condensor but when I took the flywheel off i became very confused. What the...
I just bought a fishing boat with a 1976 35hp rude, model 35602G. It's a pull start and was hoping to install a starter on it. The flywheel has teeth, the rope engages on the top of the flywheel but I don't see a starter in the parts section for a 76' 35hp motor. Any input would be appreciated.
I just bought an apache model j8 on ebay. I got it running fine but when i took off the skeg plate to the lower unit i found that the gear housing was filled with water and grease. I would expect to find the 90 weight oil with water to make the melted butter type consistency. Do these lower...
Bought a Clinton Apache model J8 off ebay. Coil, points and condensor look fine. Sparkplug is bad and is marked H-10J which is what my "old outboard book" says it should have. I can't find that plug anywhere and a sparkplug website says the Clinton J8 model uses a RH12 or H12 plug. Also the...
Found an ad for an ESKA 1.5 hp and in the description it says it runs out of water but wont run when prop is submerged? Any clue as to what this could be before I buy? Any help greatly appreciated. Thanks
Have an ebay opportunity to buy a Martin outboard on ebay but the only number the seller could provide was the serial # B25554. I can't seem to find a website for Martin model numbers can anyone help?
I have an opportunity to buy and old 1920-1930's evinrude elto outboard. The current owner says the motor has compression but does not have any spark. Can anyone tell me the prospects of finding the coil/ignition parts for this old of a motor?
Hi all, I just purchased a 1974 1747d 7hp air cooled eska outboard off Ebay. The lower unit and prop are trashed. I was able to find the lower unit and prop for a 5.5hp eska, model 217 59432, but I'm not sure if they are compatible with the 7hp I've got. If anyone knows I'd appreciate...
Bought a model 7512 1953 7.5 Hp Evinrude Fleetwin on Ebay. Picked up the motor and was able to run it in a barrel with no problems. Took it to the lake and of course had problems. Was anticipating murphy's law so luckily stayed close to shore. Problem: carburator I'm sure needs cleaning and...
