Can anyone tell me the wot on a 2006 Volvo Penta 3.0GLP-D.The owners manual states 4200-4600.I am not sure if this is the wot or cruising range they are talking about.<br />any help would be apreciated.<br />Thanks Kootcan
I have a 1987 110 hp Evenrude model #E110tlcdc.<br />Problem is when I bring the leg of the motor right in (trimmed right down) to pull skiers out the motor will not idle.When the two exhaust ports go under the water the engine quits.If I do not trim it all the way down to the exhaust holes she...
I have a 1987 glasscon (not glastron)fiberglass Boat.I am replacing the carpet and when i lifted the old carpet up I noticed 5 spots where there is grey patches painted on the floor.In theese patches I noticed cracking and soft spots so i scraped the hard grey filler which was covering a hole...
I have read the frequent asked question posts on this subject.I went to our one boat dealership and also to Napa and could not find seafoam or deep creep.I did how ever find a product made by Evinrude johnson called carbon guard which is a gasoline additive for minimizing carbon build up.<br...
I just bought a 1989 16 foot fiberglass glascon boat powered with a 1986 110hp evinrude last September and i am wandering if any body has any idea of the weight of the boat and motor. <br />Thanks for any help or ideas.
I have a 1989 16 foot glascon fiberglass boat.<br />The transom has fiberglass on the back and front .You are not able to see any wood.Is there a way to check for wood rot in the transom?<br /><br />Thanks
I have a 1989 16 foot glascon fiberglass boat.<br />The transom has fiberglass on the back and front .You are not able to see any wood.Is there a way to check for wood rot in the transom?<br /><br />Thanks
i have read many posts with the search feature with no answers to my question.<br />I have a 1989 fiberglass v hull 16 foot boat that weighs 1600 lb with a 1986 110 hp evinrude.My wot is around 6100 rpm at a speed of 41 mph.I currently have an aluminum prop 13 1/4 by 17.This rpm sounds a little...
Okay who can tell me the size or weight of a anchor i would need for my boat.It is a 16 foot fiberglass with a 1986 110 hp evinrude outboard.Weighs about 1400 pounds.<br />Thanks for any help
i am replacing the thermo switches on my 1987 110hp evinrude.I have purchased a Clymers manual for this motor.when i place the thermo switch in the hole on the heads I have to take the cylender head cover off to fit switch in place.Now i have to put covers back on.My question is in the manual it...
I have bought a boat last year in September and the identifacation tag on the side of the motor mount is gone.My motor is a 110hp Evinrude with vro.It is a metallic silverish greyish color.In one of the posts you mentioned you have 110hp outboards.I have looked at the round plug on the top of...
I have a 1987 16 foot glasscon fiberglass boat that I just bought in September and i was wandering if anybody has information on who makes them and where they are made or maybe a site i can read about the boat.<br />Any help would be appreciated.<br />Thanks.
I have a 1988 fiber glass 16 foot glasscon boat which i would like to paint the keel because it has been rubbed down to the fiberglass.Can enyone please tell me what i need to do to the bottom of the boat to prep it for painting and also is there a special paint or finish i need to use to?<br...
Can someone tell me how do you know what prop you need ?I have a 1989 110 hp Evinrude on a 16 foot boat.it will do about 45 miles an hour wot at 5800 rpm. is this okay. <br />Thanks
