Current visitors

Pmt133's latest activity

P

Pmt133 replied to the thread I have a leak..

I mean it may be possible. I did bead blast and strip/paint the whole thing and didn't recall seeing one... but now torqued with the...

Today at 3:14 AM
P

Pmt133 reacted to sdowney717's post in the thread I have a leak. with Like.

Could the housing have a crack? I have been using white Oatey Teflon pipe dope grease for sealing up all sorts of things. I use it on...

Today at 3:12 AM
P

Pmt133 replied to the thread Engine, Carb or Prop? need suggestions or ideas please..

Not going to lie... that almost sounds like a rev limiter... This is me running bouncing off the limiter last fall. The merc book states...

Yesterday at 7:11 PM
P

Pmt133 replied to the thread I have a leak..

I'm back!!! Over the weekend I swung the engine and today I float tested. I actually weighted down the back of the boat with sand bags...

Yesterday at 3:59 PM
P

Pmt133 reacted to Scott Danforth's post in the thread Frogs, Lizards and Wasps with Like.

3M acknowledged they changed the formula 3 times so far in the past 6 years My experience mirrors the test done by practical sailor a...

Yesterday at 1:27 PM
P

Pmt133 reacted to Lou C's post in the thread I/O (Sterndrive) Conversion to Outboards with Like.

Apparently Merc also tried to make their mid size Obs easy to service as well... Suzuki has one big advantage for single engine boats, a...

Yesterday at 8:11 AM
P

Pmt133 replied to the thread I/O (Sterndrive) Conversion to Outboards.

Merc has dual props on the 600hp outboard I think. Obviously not on the smaller units.

Yesterday at 8:11 AM
P

Pmt133 reacted to alldodge's post in the thread I/O (Sterndrive) Conversion to Outboards with Like.

Merc used superchargers for a short time with smaller blocks and found out there were not reliable.

Yesterday at 7:36 AM
P

Pmt133 replied to the thread Frogs, Lizards and Wasps.

Dad and myself have been using 42/5200 for years and I can say comfortably... that it doesn't seem to work the way it used to. I also...

Yesterday at 7:36 AM
P

Pmt133 replied to the thread Frogs, Lizards and Wasps.

I'm here for the eventual 3m rant. :D

Yesterday at 4:31 AM
P

Pmt133 replied to the thread I/O (Sterndrive) Conversion to Outboards.

I'll preface this by saying I am very far removed from the current outboard market in terms of ownership... but I did go down the rabbit...

Yesterday at 4:30 AM
P

Pmt133 reacted to Scott Danforth's post in the thread I/O (Sterndrive) Conversion to Outboards with Like.

Ted, don't think tabs .....think K-planes. 3 actuators and 5 square ft of surface

Saturday at 3:24 PM
P

Pmt133 reacted to ratdude747's post in the thread MC-1 Drive Dog failure? with Like.

Sloppy on the shaft.That said, from what I'm reading this is common/normal.

Wednesday at 7:16 PM
P

Pmt133 replied to the thread MC-1 Drive Dog failure?.

Define sloppy... fit to the shift shaft or fit to the bellhousing? There is a little play in the lower for the foot to move around and...

Wednesday at 6:34 PM
P

Pmt133 reacted to MikeSchinlaub's post in the thread Boats from work. with Like.

Finished buffing the Ranger today. I have a light tied to my cart, and it looked good with that, so I thought I was done earlier. Then I...

Wednesday at 3:13 PM

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Pmt133's latest activity

Follow Us