Pmt133's latest activity

  • P
    Pmt133 replied to the thread cooking.
    All 10 speeds work. The difference between 8 and 10 isn't all that much but stir-8 works just fine. 10 is really reserved for whipped...
  • P
    Pmt133 reacted to tpenfield's post in the thread I/O (Sterndrive) Conversion to Outboards with Like Like.
    For anyone referencing this thread for engine pull, here is my final check list, as I added a few things on the fly during the 'pull'.
  • P
    Pmt133 replied to the thread cooking.
    Cylinder 1 was 45psi. Its rolling over backwards. Serial K5ss. Please advise. Yeah. The unit itself is 89 or 91 but they definitely...
  • P
    Pmt133 reacted to Mc Tool's post in the thread cooking with Like Like.
    Or that aint the real issue .... post actual compression readings and serial # :ROFLMAO::ROFLMAO:
  • P
    Pmt133 reacted to redneck joe's post in the thread cooking with Like Like.
    Yeah we got one for MIL a few years back and she never used it so we took it and it absolutely does not compare to mine which is circa 1997.
  • P
    Pmt133 replied to the thread Cruiser comparison.
    My area has good dealer service for both, the Volvo parts can be more difficult to get where merc is typically on the shelf for the more...
  • P
    Pmt133 replied to the thread cooking.
    The sacrificial gear in the drive lasts about 6 months now. The original went 35 years but the replacements aren't as good a quality it...
  • P
    Pmt133 reacted to Mc Tool's post in the thread cooking with Like Like.
    :D I call mine the handbrake ......she doesnt like it :LOL:
  • P
    Pmt133 replied to the thread cooking.
    I baked a crumb cake and fixed the kitchenaid (again).
  • P
    Pmt133 reacted to Mc Tool's post in the thread cooking with Like Like.
    Himalayan Tahr burgers back legs minced up ( apparently the front didnt look so flash after being ventilated with a 7mm magnum )...
  • P
    Pmt133 reacted to tpenfield's post in the thread I/O (Sterndrive) Conversion to Outboards with Like Like.
    Engine #2 is done and safely on the ground. . . . . . Big milestone for this project . . . .Looks like I'll be cleaning up the...
  • P
    Pmt133 reacted to tpenfield's post in the thread I/O (Sterndrive) Conversion to Outboards with Like Like.
    ! down, 1 to go . . . I had to update my chart. As I was lifting the first engine, the starboard side did not want to go. So I put...
  • P
    Pmt133 reacted to tpenfield's post in the thread I/O (Sterndrive) Conversion to Outboards with Like Like.
    A bit rainy today, so not as much work done. I did go to Harbor Freight to get a tool for the steering actuator. . . I was able to get...
  • P
    Pmt133 replied to the thread gotten one of these?.
    I think NJ cuts a break for the commercial and charter guys. Been a long time since I looked at how they break down the code. Its still...
  • P
    Pmt133 replied to the thread gotten one of these?.
    Gas tax increase?
Show older items
Top