Just returned from 10 days at a long reservoir in Oregon. Great time but long reservoir and large loads proved difficult. Now I am thinking new motor. The boat is a 21 ft. Lund Angler built in 1994 and the motor is also a 1994. It doesn't have many hours on it and ran like a top BUT. My...
Has anyone tried mounting a bracket forward of the playpen for an electric trolling motor. Thought if it worked you could then use a stern mount motor with a shorter shaft - both of which are more affordable. If you use a remote control it could be low and out of the way.
My two concerns are...
Wanting to add a board ladder to the forward center of my pontoon boat . Problem is the eye for attaching the trailer wench is mounted under the deck on a cross deck support. If I mount the ladder so it will retract into the open area under the deck it would prevent the use of this eye. How...
This is the motor that had the thermal runaway. I tried to follow the advise I recieved on this forum. I rebuilt the water pump - changed the lube in the lower unit. I then filled a tank and started the motor. It ran well for about two minutes at approximately 600 rpm. The telltale was...
Some time ago I ask this forum if anyone new anything about a Lund Pontoon. At the time I was waiting to take possession of the boat (it was stored in a warehouse and I could get to it). Well I finally have the boat and as promised way back then - here are a few pictures:
I have new vinyl on...
The manual says remove screw securing shift rod to shift rod connector. I don't see any way to access the screw without removing the VRO assembly. Am I missing something. For some reason the manual doesn't mention this part at all. Just hoping there is some easier way.
I am trying to...
I have a new to me motor that has been sitting without running since 2002 and only had 50 hours or so on it before that. It has/had VRO and is electric start. Not sure what the previous owner had done but the VRO had been leaking for a long time so the bottom of the motor had a plastic bag...
New motor to me with an obvious leak where the oil line attaches to the motor. My question is - does this suggest that there is likely issues with the fuel pump or as simple as just a loose attachment. Not wanting to start the VRO debate anew I am just trying to trouble shoot to avoid future...
I just purchased a pontoon boat with a "very" lightly used 40 horse Johnson. That motor has less than 50 hours on it and has been sitting in a barn since 2002. Besides going through everything rubber I have one glaring issue and would like to have input on where to start.
The motor has...
I just purchased a 1994 Lund pontoon. Now I find they are a little rare because I haven't been able to find another on the internet or any information about them. If some one out there has one or has information about them please let me know. I am fixing this one up and would at least enjoy a...
