i had a 24v motorguide w75 electric troller on my boat and during the winter i think that it got water inside the housing somehow and then froze and wrecked the motherboard. i yarded that boat anchor off my boat and put a brand new Minnkota Maxxum 55 12V foot controlled bowmount on in its place...
i had to remove my oil tank to get some debris out of it. the sensor was shutting me down at about 2k rpm, the manual said to take the sensor off and clean or replace it so i cleaned it. now the main feed line to the oil injector pump has no oil in it. i fired it up for a second to see if it...
the inline sensor/filter was clogged on my motor, i took off the oil tank to get to it and cleaned it out and put it back together and the rev limiter started working again. at first i couldnt get to 3k rpm and the oil light would flash, and the motor would slow down. after cleaning it it was...
the inline sensor/filter was clogged on my motor, i took off the oil tank to get to it and cleaned it out and put it back together and the rev limiter started working again. at first i couldnt get to 3k rpm and the oil light would flash, and the motor would slow down. after cleaning it it was...
