Thank you sir, although great information it’s not what I am up against. I have a 2 foot area right along a stringer that I will be removed the upper glass, core, and the lower glass. The new lower section of glass needs to be bonded to the stringer. Stringer is glass about 4-5 inches wide. No...
Hey all, long story short t top pulled out of a boat I’m working on. The rear foot held on and cracked the bottom of the deck a couple inches inboard of the left hand stringer. It also broke the bond to the stringer so I need to fix them both.
Im going through the top of the deck. Part I’m not...
Hey all, I’ve been reading trying to get info about adding the engine gauges to the unit from a 2000, 200 merc. I’m redoing the panel and wondering if I can eliminate the gauges as they are fogged over. I know the merc doesn’t have the NMEA 2000 but I see some analog converters. Trying to see...
What are other guys running for a prop on your late 90's 130's? When I bought the motor it came with a ballistic 14 3/4 X 17 prop P/N 345032. When I research it it says its for my motor but if you search by motor its calling our for a 13" prop. Im running around 55-5700 RPM, I havnt looked...
I havnt owned my engine that long but when I bought it it ran real smooth but didnt like to idle. Its had a major tune up etc and then went into a shop to get the timing done and it needed the mixtures adjusted.
Now my engine runs good idles well but has a small shake at idle up to 2400 rpm...
Hey I have a 97 Evinrude 130. Two weeks ago my engine starting shaking at 2400-3000 rpm ( noticed it after hitting another boats wake a little hard. I took it out the other day and it ran fine at idle up to 2400 rpm, and fine over 3000 rpm.
I can cruise at 2200 rpm and it seems fine, as soon as...
Hey all I have a 97 Evinrude 130. I bought it last a few months back and I cant seem to get it to idle well. Sound like its missing from time to time and likes to die out at idle. Sounds as if the RPM at idle is low. Yesterday I had it out and now coming out of idle its acting like its loaded up...
Hey all,
I have an 97 Evinrude 130. Sunday I put the boat in the water to make sure it ran good for Monday. Ran good for 4 hours with the exception after idling up the new river for a while when I got to the ramp at idle sometimes it would die.
Took it back to my house checked the plugs, changed...
Hey I'm re wiring my boat with a 97 Evinrude 130 on it. Anytime something broke the just hacked the wiring to take it out of the system. Anyways I have a 3 wire kill switch and Ive searched the net and only found wiring for a 2 wire kill switch. Whats the reason for 3 wires? It has 2...
