Recent content by Ray2

  1. R

    46 thru 49 td-20pull start assembly springs?

    hi guys,looks like its missing springs,maybe more wondering where i could find a parts diagram, i dont know what its supposed to look like,also i was wondering just what year it was made in,serial #697 669 td-20 many thanks//Users/monniecraft/Desktop/Images/1.jpg
  2. R

    gasket compound cd-10 5.5

    anybody ever use k+w copper coat gasket compound on new head gasket,machinist at nappa recommended it,
  3. R

    54 cd-10 5.5hp how to tell if rings and pistons are bad?

    had 30 psi on both pistons, put motor horizontally poured about 2oz in each cylinder let set for over 8 hrs.sanded head on flat glass until shiny smooth, put new head gasket on , checked pressure again and still 30/30 hooked gas back up pulled and pulled no start,pulled plugs shot air in and...
  4. R

    1954 johnson cd-10 5.5 hp low compression?

    hi guys,my motor checked 30 psi on both cylinders and would not stay running,so i took advice from here and put new carb kit,head gasket,all new fuel lines and filter plus sanded head on glass, plus put motor up and poured sea foam down both cylinders and let soak for over 8 hours,then checked...
  5. R

    cd10 5.5hp

    what does decarb the motor mean? as relating to low compression,yes, i'm new to outboards, thanks.
  6. R

    1954 johnson cd-10 5.5 hp compression

    hi, just got this cd-10 5.5 and it has been sitting for over two years or more,so i cleaned tank out real good and put new 16-1 gas in put in barrel started but would not stay running, very erratic would not , it has blue spark and pumps water ,so i thought before i got a carb kit for it i...
See more
Top