Recent content by Reidstra

Compression is fine. Top cyl cuts out sometimes and runs good sometimes

On water

Last year engine would cut out to 1 cyl sometimes. Put new coils, wires, plugs, condenser and points. Took it out this year was on 2 cyl then cut to 1 again. Noticed lack of water so brought it home change impeller and double checked everything. Plugs and points gapped proper. I know not much...

Thats not my motor thats someone thst replied to my issue

I bought new thermostat but running it without thermostat right now and still running too hot.

I just opened and checked water pump and its all good. Wondering if tube or water jacket may have blockage? How would i check this?

Its my friends. 2nd owner. Fresh water. Runs good just runs to hot

Yes had it in lots water. Pin must be in as water discharging when i increase idle.

Model rd-15

New impeller, thermostat. Started water pump working as water comes out on high idle but very little on low idle which i believe is normal for this year. Ran 2 minutes temp gun shows 170f upper 200f lower with thermostat removed. Compression 90psi both cylinders. I'm thinking my next move is...