FYI....While searching for these numbers, I called Hardin Marine because they have aftermarket pumps that are claiming to last longer than 100 hours. Bought one instead of rebuilding this one.
I am trying to rebuild the water pump because the bearing is crooked and keeps throwing the belt off. Does anyone know where I can purchase the seal and bearing?
I am looking for these style rocker switches, specifically the port side trim tab switch. I have looked at ebay with no luck any help would be appreciative.
1993 OMC 5.8l (FWC). I check the oil every week and every week it seems to rise 1/4 in on the dipstick. I thought it was the mechanical fuel pump leaking gas in the motor so I changed it with a new one and it is still rising. The oil is clear and the oil cap has no signs of foam. I just can't...
I currently have a 1993 351 hooked to a hurth transmission and it is time to replace the motor. Will a chevy 350 bolt up and will there be a lot of trouble doing the conversion? Has anyone ever replaced the motor while it is in the slip?
I have a 650sx that i can't get started there is a lot of spark and fresh gas but every time I crank the starter and check the plugs it looks like oil is on the plug. Do you guys have any suggestions.
I am not new to boating, but am new to this boat and OMC what are the tanks on the motor. one more question I have 3 batteries one for the generator and one for each motor would it be beneficial to install another battery for each motor so I would have two for each one? anything else you guys...
where do i find parts for this door? it is missing the track and all the hardware for the top, the bottom is in good condition
http://img24.imageshack.us/img24/1963/img0008lq.jpg
http://img293.imageshack.us/img293/9673/img0011v.jpg
http://img215.imageshack.us/img215/4930/img0010bn.jpg...
I have a 1993 Chris craft Crowne and I am trying to find parts for the various things broken on this boat (door,tracks, etc..). I checked with Chris Craft with no luck the only thing I found on the web were antique parts. Does anyone know of a place?
I just bought a 1993 Christ Craft with two 351 commanders. Where can i find a manual for these motors, I know there ford motors but I can't really find anything else. thanks
I am needing help identifying what kind of outdrive I have, the ram is leaking and I can not find the part number to replace it with. I don't know if it is a 280 or a 290. The boat is a 1995 Chriscraft 26' with a 7.4GL. Thanks
http://i42.tinypic.com/or1fs4.jpg
I am working on a 1995 VP with a 454 and a 280 outdrive. One of the rams has started leaking considerably and am trying to find one. Can anyone point me in the right direction.
My 1995 VP 7.4l was hydrolocking this weekend so i decided to check the plugs and low and behold #1 and #3 had water in them. I checked the oil and there is no signs of any water in the oil, i have checked it every weekend since April 1st and it is has been the same every weekend. (level and...
