HISTORY: I put this 94 merc 150efi motor on my 17 mako. It ran great but at high rpm's would suck the primer bulb flat. I'm thinking fuel restriction in the tank; I replaced a few filters and floats and tried to clean the vent and it worked some, but at higher rpm's would suck flat.<br /> This...
After recently fixing some electrical problems thanks to the guys here at i-boats, my boat is not running right. It starts and idles great but when I start to accelerate it boggs down and stalls. In order to get the boat on a plane I have to flip the choke on and the off and it gives the boat...
I recently had start problems probably due to the kill switch. When I removed the white wire from the CDI unit it bypassed the kill switch but would not shut off. I can't find a similar kill switch and want to know how to remove the kill switch wires and run without a kill switch.
My 1988 Yamaha 115 recently was not running, because of a kill switch problem. I posted the topic and thanks to the guys here, I fixed it. I had to disconnect the white killl switch wire from the CDI unit in the motor. On ce I did that the motor started and ran. <br /><br />The only problem was...
My 1988 Yamaha 115 was running recently and had some carb problems but I was cleaning and adjusting as necessary. While driving the boat it started sputtering and then died completely. Once home I found that the main electrical connector in the engine had come apart and 1connecting tooth had...
