Yes, here is the front and back. Need to tighten up the back ones a bit more - some brutal washboards on the way to the launch pushed once side down a bit - but it worked out nicely.
Thanks! I ended up using those in the back where the rollers were and they seem to work nicely. I was worried about them being at an angle but they are very solid and should hold strong.
In the front I mounted the bunks directly to the cross brace, as the space is much smaller. Angle is good and...
I am hoping to replace the rollers on my older (1990ish) homemade trailer with bunks for my Lund Rebel boat (aluminum hull, 16’ long, 6’ beam). I am up for the task of doing it myself - or at least thought I was until I realized my trailer cross members are not aligned.
The front cross member...
This might be a silly question, but how can I tell if my trailer axle shaft is straight or stepped? I need to replace my bearings, but am not sure what kind to buy. There is a slight "step" on the axle near the part closest to the centre of the trailer, but otherwise the axle is straight until...
I've checked dozens of other speedometer posts, and can't seem to find any information on this. My speedometer seems to work (goes from 16 to around 40 mph, with a 40hp motor on a 15.5' aluminum boat), but doesn't go to zero. Is there an easy way to reset it? It's not a huge deal -- I can do...
Like many on this forum, I've had a nightmare with the manual tilt assist cylinder on my Johnson outboard. (It's currently frozen in the down position.) While I understand why everyone recommends replacing the manual assist with a power t/t system, I simply don't have the money to do that...
I've found this site to be a HUGE help for a first-time boat owner, but have one question I can't seem to answer from previous posts. I just bought a 15.5' aluminum fishing boat with a 40 hp Johnson Tracker outboard (1989) and electric start. I have one very reliable dual purpose marine...
Great forum -- my first post!
I recently bought a boat/motor/trailer package with a 40 hp 1989 Johnson Tracker -- model J40ELCEC. I don't have the manual for the motor, unfortunately, and am very new to boat/motor maintenance.
I'm currently shopping for batteries, and thought it would make a...
